Sony KP-65WV600 - 65" Wide Screen Projection Tv, Service Manual, Page: 54 / 444

— 54 —
KP-57WV600/57WV700/
65WV600/65WV700
2-15. AUTO REGISTRATION ERROR CODES
If an error code is displayed after the set has been correctly adjusted, check the following items: position, tilt and sizing. If any of these adjustments are
off, even slightly, the auto-registration pattern will not hit the four sensors properly. This occurs when the internal generator patterns are being
ß ashed
on the screen for the sensors to read. Therefore, auto registration (called auto convergence) cannot operate properly, causing an error code to be
displayed. In order for this function to operate properly, position, tilt and size must be adjusted properly.
ERROR CODE LIST
ERROR
CODE DESCRIPTION NOTE
00 No Error
10 Sensor 0 low output Check sensor 0, connection/wiring, circuit, and pattern position
(are patterns hitting sensor?) adjust 66 VUP, 70 HMID if necessary.
11 Sensor 1 low output Check sensor 1, connection/wiring, circuit, and pattern position
(are patterns hitting sensor?) adjust 69 HLE, 67 VMID if necessary.
12 Sensor 2 low output Check sensor 2, connection/wiring, circuit, and pattern position
(are patterns hitting sensor?) adjust 71 HRIV, 67 VMID if necessary.
13 Sensor 3 low output Check sensor 3, connection/wiring, circuit, and pattern position
(are patterns hitting sensor?) adjust 68 VLOW, 70 HMID if necessary.
20 Sensor 0 high output Check sensor 0 and circuit.
21 Sensor 1 high output Check sensor 1 and circuit.
22 Sensor 2 high output Check sensor 2 and circuit.
23 Sensor 3 high output Check sensor 3 and circuit.
30 V CENT or SKEW adjustment loop overflow Check 67 VMID data and check registration condition.
31 H CENT or SKEW adjustment loop overflow Check 70 HMID data and check registration condition.
32 H LIN or SIZE adjustment loop overflow Check 69 HLE and 71 HRIV data and check registration condition.
40 V CENT regi data overflow Check 67 VMID data and confirm V CENT data (all modes) is not near 511.
41 H CENT regi data overflow Check 70 HMID data and confirm H CENT data (all modes) is not near 511.
42 V SKEW regi data overflow Check 67 VMID data and confirm V SKEW data (all modes) is not near 511.
43 H SKEW regi data overflow Check 70 HMID data and confirm H SKEW data (all modes) is not near 511.
44 H LIN regi data overflow Check 69 HLE and 71 HRIV data and confirm H CENT data (all modes)
is not near 511.
45 H SIZE regi data overflow Check 69 HLE and 71 HRIV data and confirm H CENT data (all modes)
is not near 511.
50 V CENT regi data overdrow Check 67 VMID data and confirm V CENT data (all modes) is not near -512.
51 H CENT regi data overdrow Check 70 HMID data and confirm H CENT data (all modes) is not near -512.
52 V SKEW regi data overdrow Check 67 VMID data and confirm V SKEW data (all modes) is not near -512.
53 H SKEW regi data overdrow Check 70 HMID data and confirm H SKEW data (all modes) is not near -512.
54 H LIN regi data overdrow Check 69 HLE and 71 HRIV data and confirm H CENT data (all modes)
is not near -512.
55 H SIZE regi data overdrow Check 69 HLE and 71 HRIV data and confirm V CENT data (all modes)
is not near -512.
60 CENT/SKEW calibration loop overflow Check 70 HMID and 67 VMID data and check registration condition.
61 SIZE/LIN calibration loop overflow Check 69 HLE, 71 HRIV, 66 VUP, and 68 VLOW data and
check registration condition.
70 V CENT/SKEW ratio limit Check sensors 1 and 2, connection/wiring, circuit, increase 65 RTLM.
71 H CENT/SKEW ratio limit Check sensors 0 and 3, connection/wiring, circuit, increase 65 RTLM.
73 H SIZE/Lin ratio limit Check sensors 1 and 2, connection/wiring, circuit, increase 65 RTLM.
80 SIZE Limit Error Check that horizontal SIZE data is not near 64 SZLM.
* In the case of multiple errors, last error is displayed.