18
Using the Remote Control
Inserting the batteries
Insert two size AA (R6) batteries (supplied)
by matching the + and – on the batteries to
the diagram inside the remote control’s
battery compartment.
Notes:
• Remove the batteries to avoid damage
from possible battery leakage whenever
you anticipate that the remote control
will not be used for an extended period.
• Handle the remote control with care.
Avoid dropping it, getting it wet, or
placing it in direct sunlight, near a heater
or where the humidity is high.
• Your remote control can be programmed to
operate most video equipment.
(see “Operating Video Equipment” on
page 51)
Basic Set Up
Using the remote control joystick
The supplied remote control has a joystick
which moves the on-screen selector in four
directions. In most cases, moving the joystick
up, down, left or right will cause the selector
to move in the selected direction.
In some cases, the selector may move in four
directions according to the function. Pressing
down on the center of the joystick (
) will
activate the selected item.
You may also move the joystick right to
activate a selected item. (There are some
exceptions to this option.)
Select
MENU
RESET
VOL
CH
AUDIO
AUDIO
GUIDE
INDEX
FREEZE
Move
.
Adjusting Sliders
When menu items present a slider (
or
), move the joystick up, down, left or
right to adjust the setting.
On Line Help/Instructions
Several menu windows will provide
prompts and instructions to assist you in
navigating through the different functions.
