– 34 –
KP-48V85/53V85/61V85
RM-Y905
RM-Y905 RM-Y905
56
DVD Player manufacturer code
numbers
Manufacturer
Code
Sony
751
Panasonic
753
Pioneer
752
RCA
755
Toshiba
754
Tips
z
•
In some rare cases, you may not be able to operate
your non-Sony video equipment with the supplied
remote control. In this case, please use the
equipment's own remote control.
•
When you remove the batteries, the code number may
revert to the factory setting.
To operate video equipment
1
Set the VTR1/2/3/DVD/MDP switch to
the input through which you would like to
access your video equipment.
2
Press DVD/VTR (FUNCTION).
3
Use the VCR/DVD/MDP operation
buttons indicated in the following tables.
Operating an MDP using the remote
control
To turn On/Off
To play
To stop
To pause
Operating a VCR using the remote control
To turn On/Off
To select a channel
To change channels
To record
To play
To stop
To fast forward
To rewind the tape
To pause
To search the
picture forward or
backward
To change input
mode
Press DVD/VTR (POWER).
[Green Button]
Press the 0 – 9 buttons.
Press CH +/–.
Press
while
pressing
(REC) (upper).
Press
(
.
Press
p
.
Press
)
.
Press
0
.
Press
P
. Press again to
resume normal playback.
Press
)
or
0
during
playback. Release to
resume normal playback.
Press TV/VTR.
Press DVD/VTR (POWER).
[Green Button]
Press
(
.
Press
p
.
Press
P
. Press again to
resume normal playback.
Operating a DVD Player using the remote
control
To turn On/Off
To play
To stop
To pause
To step through
different tracks of
an audio disc
To step through
different chapters
of a video disc
To display the Title
menu
To select DVD
multilingual sound
To display the DVD
menu
To select tracks
directly
To display the
menu (Set up)
Press DVD/VTR (POWER).
[Green Button]
Press
(
.
Press
p
.
Press
P
. Press again to
resume normal playback.
Press
)
to step forward or
0
to step backward.
Press CH + to step forward
or CH – to step backward.
Press TITLE.
Press AUDIO repeatedly.
[Pink Labeled Button]
Press DVD MENU.
Press 0-9 buttons.
Press MENU.
Press
)
or
0
during
playback. Release to resume
normal playback.
Press CH +/–.
To search the picture
forward or backward
To search a chapter
forward or backward
Operating Video Equipment (continued)
57
Manufacturer code numbers
(satellite receiver)
Manufacturer
Code number
Sony
801 (preset code for
remote control)
Geneal Electric
802, 808
Hitachi
805
Hughes
804
Panasonic
803
RCA/PROSCAN
802
Toshiba
806, 807
To operate the cable box or
satellite receiver (SAT)
1
Press SAT/CABLE (POWER) [Green
Button] to turn on/off the cable box or
satellite receiver.
2
Press SAT/CABLE (FUNCTION).
3
For other operations, refer to the
operating instructions that come with the
equipment.
The GUIDE and INDEX (blue-labeled)
buttons can be used only with a satellite
receiver.
If the remote control doesn’t work
• Try repeating the set up procedures using
the other codes listed for your equipment.
Operating a Cable Box or Satellite Receiver (SAT)
To operate the projection TV
Press TV (FUNCTION). Then use the
projection TV control buttons to control the
projection TV.
Tips
z
•
If more than one code number is listed, try entering
them one by one until you come to the correct code for
your equipment.
•
If you enter a new code number, the code number you
previously entered at that setting is erased.
•
In some rare cases, you may not be able to operate
your equipment with the supplied remote control. In
this case, use the equipment’s own remote control
unit.
•
Whenever you remove the batteries — to replace
them, for example — if too much time is taken, the
code numbers may revert to the factory setting and
must be reset.
Setting the Manufacturer's
Code
You can program the supplied remote control
to operate a cable box or satellite receiver.
Press CODE SET, SAT/CABLE
(FUNCTION), and the 0-9 buttons to enter
the manufacturer’s code number (see the
following chart), then press ENTER.
For example, to operate a Sony satellite
receiver:
Manufacturer code numbers
(cable box)
Manufacturer
Code
Hamlin/Regal
222, 223, 224, 225, 226
Jerrold/G. I.
201, 202, 203, 204, 205,
222, 206, 207, 208, 218
Oak
227, 228, 229
Panasonic
219, 220, 221
Pioneer
214, 215
Scientific Atlanta
209, 210, 211
Tocom
216, 217
Zenith
212, 213
1
8
0
CODE SET
ENTER
SAT/CABLE
FUNCTION
