— 10 —
KP-46WT510
1-1. REAR BOARD REMOVAL
SECTION 1: DISASSEMBLY
Nine Screws, dome washer
HEX tap 4 x 20
Rear board
2
1
Three screws,
dome washer
HEX tap 4 x 20
Chassis assy
2
1
From V board CN9001.
(The extension cable is not
supplied because of the
countermeasure for radiation.)
D board
CN17, 18, and 19
A board
Covers
Remove covers from chassis assembly
with pliers when checking printed circuit boards.
After checking, turn the covers over
and re-secure them with the screws.
Screws
(+BVTP 3x12)
Chassis assembly
Disconnect CN17, 18, and 19
on the A board.
1
2
1-2. CHASSIS ASSEMBLY REMOVAL
1-3. SERVICE POSITION
Summary of Contents for KP-46WT510 - 46" 16:9 Hi-scan Projection Television
