16
Menu System
Level 1
Level 2
Level 3 / Function
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the “Set Up” menu
allows you to:
a)
Preset channels or the VCR channel one by one to the programme order of your choice. To do this:
1
After selecting the ”Manual Programme Preset” option, press
then with
Programme
option highlighted press
.
Press
or
to select which programme number you want to preset the channel on (for VCR, select programme number
“0”). Then press
.
2
The following option is only available depending on the country you have selected in the “Language/Country” menu.
After selecting the
System
option, press
. Then press
or
to select the TV Broadcast system (
B/G
for western
European countries,
D/K
for eastern European countries,
L
for France or
I
for United Kingdom). Then press
.
3
After selecting the
Channel
option, press
. Then press the number buttons to enter directly the channel number of the
TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press
or
to search for it. When
you tune the desired channel, press
OK
twice to store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this: highlighting the
Programme
option, press the
PROG +/-
button to select the programme number with the channel
you wish to name. When the programme you want to name appears on the screen, select the
Label
option and press
. Next
press
o
r
to select a letter, number or “-“ for a blank. Press
to confirm this character. Select the other four characters in
the same way. After selecting all the characters, press
OK
twice to store.
c)
Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, however you
can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the
AFT
option and press
. Next press
or
to adjust the fine tuning between -15 and +15. Finally press
OK
twice to store.
d)
Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this: highlighting the
Programme
option, press the
PROG +/-
button to select the programme number you want to skip.
When the programme you want to skip appears on the screen, select the
Skip
option and press
. Next press
or
to select
Yes
. Finally press
OK
twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e)
View and record scrambled channels when using a decoder connected to Scart
3
/
3
directly or through a VCR.
This option is only available depending on the country you have selected in the “Language/Country” menu.
To do this: select the
Decoder
option and press
. Next press
or
to select
On
. Finally press
OK
twice to confirm and
store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
S
continued...
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Enter Menu:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter Menu:
Enter:
Set Up
Select:
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Picture Adjustment
Select:
Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
Personal
AUTO
