background image

25

GB

Using the Teletext menu

1

With Teletext switched on (in mode “Teletext only”), press the 

MENU

  button on the remote control to display the teletext menu on the TV
 screen.

2

Push the joystick 

4

 or 

$

 to select your chosen item, then push to 

z

 

to display the relevant sub menu.

3

To remove the teletext menu from the screen, press the 

MENU

button.

Top / Bottom / Full

The Top/Bottom/Full sub menu allows you to enlarge different
sections of the Teletext page. Push the joystick 

4

 to enlarge the

upper half of the screen, push 

$

 to enlarge the lower half. Press

the 

OK

 button to restore the page to normal size.

Text Clear

After having selected this function, you can watch a broadcast channel 
while waiting for a requested Teletext page. As soon as the page is 
available, the symbol 

 changes colour. To view the page, press 

.

Reveal

Some teletext pages contain hidden information (eg for a quiz),
which you can reveal. The hidden information appears on screen.

Time Page

(depending on availability of teletext service)

You can call up a time-coded page such as an alarm page at a time 
specified by you. After you have displayed the Time Page sub menu: 

1

Press the numbered buttons on the remote control to enter the
three digits of the desired page.

2

  Press the numbered buttons again to enter the four digits of the

desired time.

3

 Press the 

OK

 button to store the desired time. The time is displayed

in the top left corner of the screen. At the requested time the page is
displayed.

Page Overview

(depending on availability of teletext service)

In the Page Overview menu the block and group pages of TOP- Text
are sorted into two columns, so that the customer can easily select this 
page. For each block page in the first column, the corresponding
group pages are shown in the second column. Push the joystick 

4

 or 

$

 

to select the desired block page, then push 

z

 to enter to the group pages 

column. Push 

4

 or 

$

 to select the desired group page .

Finally, press the 

OK

 button to display the page.

Teletext

Teletext

  

S

RM 903

PROGR

MENU

1

4

7

2

5

8

0

3

6

9

TV

VIDEO

Teletext

Top / Bottom / Full

Text Clear

Reveal

Time  Page

Page Overview

Select:

Enter:

Top:

Bottom:

Full: OK

Time  Page

PAGE

TIME

Select Page: 0-9

Next:

- - : - -

– – –

Summary of Contents for KP-44PS2U




































Reviews: