Operations
23
-EN
EN
3
1
2
4
5
6
7
8
9
0
ENTER
Watching TV
programs
Operations
3
Press VOL +/– to adjust the volume.
Switching quickly between two
channels
Press JUMP.
The channel you previously selected with the 0–9
buttons appears.
Pressing JUMP again switches back the channel.
Muting the sound
Press MUTING.
“MUTING” appears on the screen.
To restore the sound, press MUTING again, or press
VOL +.
Displaying on-screen information
Press DISPLAY repeatedly until the desired
display appears.
Each time you press DISPLAY, the display changes as
follows:
Status display*
n
XDS**
n
Caption Vision***
* Channel number, the current time, channel caption (if set),
and MTS mode (if SAP is selected) are displayed. SAP
indication disappears after three seconds.
** Some programs are broadcast with XDS (Extended Data
Service) which shows a network name, program name,
program type, program length, call letters, and time of the
show. When you select XDS with the DISPLAY button, this
information will be displayed on the screen if the broadcaster
offers this service.
Check that the CABLE BOX/TV selector is set to TV.
1
Press POWER (TV) to turn on the projection
TV.
The TIMER/STAND BY indicator flashes until the
picture appears.
If “VIDEO” appears on the screen, press the TV/
VIDEO or TV button so that a channel number
appears.
2
Select the channel you want to watch:
To select a channel directly
Press the 0 – 9 buttons and then press ENTER.
For example, to select channel 10, press 1, 0 and
ENTER.
To scan through channels
Press CH +/– until the channel you want to watch
appears.
MUTING
SLEEP
MODE
Low position
TV/VIDEO
DISPLAY
VOL +/–
POWER (TV)
TV
JUMP
0–9 buttons
ENTER
CH +/–
CABLE BOX/TV
POWER
TV
CH
VOL
JUMP
MUTING
DISPLAY
(continued)
DISPLAY OFF
