Sony KLV-46S200A Service Manual Download Page 113

Page: 113 / 120

KLV-46S200A

2-685-864-

(1)

Usin

g Op

tio
nal

Eq
uip
m

Using the Tools menu in PC input mode

Press TOOLS to display the following options when
viewing pictures input from the connected PC.

To connect

Do this

S VHS/Hi8/DVC
camcorder or video
game equipment

Connect to the S video jack

or the video jack

2, and the

audio jacks

2. To avoid picture

noise, do not connect the
camcorder to the video jack

and the S video jack

2 at the

same time. If you connect mono
equipment, connect to the L
(MONO) jack

Headphones

Connect to the

jack to listen to

sound from the TV on headphones.

Connect to the PC

(RGB)

jack and the audio jack

. It is

recommended to use a PC cable
with ferrites.

Digital satellite
receiver or digital
terrestrial receiver

Connect only to the HDMI IN
jack. The digital video and audio
signals are input from the digital
satellite receiver.

Tip

If the digital satellite receiver has an
HDMI jack, connecting via an HDMI
cable will provide the best results.

Note

When using an HDMI-to-DVI cable
or an adaptor, be sure to connect the
DVI output connector first; then
connect to the HDMI jack on the TV.

Video game
equipment, DVD
player without
component video
output, or VCR

Connect to the S video jack

1 or the video jack

1 or

3, and the audio jacks

1 or 3.

To avoid picture noise, do not
connect the camcorder to the video
jack

1 and the S video jack

1 at the same time. If you

connect mono equipment, connect
to the L (MONO) jack

1 or 3.

DVD recorder or
VCR

Connect to the video output jacks

to record the image from the

TV. Connect to the audio output
jacks

to record the sound

from the TV on the DVD recorder
or VCR. To turn off the sound of
the TV speakers, set “Speaker” to
“Off” (page 24).

DVD player with
component video
output

Connect to the component jacks

1, 2 and the audio jacks

1, 2. For better picture quality,
component connection is
recommended if your DVD player
has a component video output.

Hi-Fi audio
equipment

Connect to the audio output jacks

to listen to the sound from the

TV on the Hi-Fi audio equipment.
To turn off the sound of the TV
speakers, set “Speaker” to “Off”
(page 24).

Options

Description

Close the Tools Menu.

Power Saving

See page 24.

Picture Mode

See page 18.

Sound Mode

See page 20.

Auto Adjustment

See page 25.

Horizontal Shift

See page 25.

Vertical Shift

See page 25.

To connect

Do this

010COV.book Page 29 Monday, May 22, 2006 9:39 AM

Summary of Contents for KLV-46S200A

























































































































Search results

Summary of Contents for KLV-46S200A

Reviews:

Related manuals for KLV-46S200A

Brands by name

Popular brands

Sony KLV-46S200A, Service Manual

Search results

Summary of Contents for KLV-46S200A

Reviews:

Related manuals for KLV-46S200A

Brands by name

Popular brands