background image

23AA9ABD4CBEDEA91407506AB84FAEA8217AB167621A915CC7A3BAEEA15A0AEE6705885A70374EDB

KLV-46EX430(CH)

5

WARNINGS AND CAUTIONS

USE CAUTION WHEN HANDLING THE LCD PANEL

When repairing the LCD panel, be sure you are grounded by using a wrist band.
When repairing the LCD panel on the wall, the LCD panel must be secured using the 4 mounting holes on the rear cover.

1)

Do not press on the panel or frame edge to avoid the risk of electric shock.

2)

Do not scratch or press on the panel with any sharp objects.

3)

Do not leave the module in high temperatures or in areas of high humidity for an extended period of time.

4)

Do not expose the LCD panel to direct sunlight.

5)

Avoid contact with water. It may cause a short circuit within the module.

6)

Disconnect the AC power when replacing the backlight (CCFL) or inverter circuit. (High voltage occurs at the inverter circuit at 650Vrms.)

7)

Always clean the LCD panel with a soft cloth material.

8)

Use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short.

9)

Protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).

10) It is recommended not to exceed 1 hour of Power-On nor Burn-in period with LCD panel face down condition, in repair activity. 

Summary of Contents for KLV-46EX430





































Reviews: