– 17 –
Problem
No picture (screen is dark), no sound
Poor or no picture (screen is dark), but sound is OK
Poor picture quality when watching an RGB video source
Good picture but no sound
No colour for colour programmes
Remote Commander does not function
If you continue to have problems, have your TV serviced by qualified personnel. Never open the casing yourself.
Troubleshooting
Here are some simple solutions to some problems which may affect the picture and sound.
Solution
• Plug in the TV in.
• Press
f
on the TV (if
f
indicator is on, press
O
or a programme number
on the Remote Commander).
• Check the aerial connection.
• Check if the selected video source is on.
• Press
to enter the PICTURE CONTROL menu and adjust the
brightness, contrast and colour.
• Press
repeatedly to select
.
• Press
+.
• If
o
is displayed on the screen, press
o
.
• Press
to enter the PICTURE CONTROL menu, select RESET, then
press OK.
• The batteries are weak.
30
31
Warning Indicators
When a problem occurs, the indicator flashes as follows.
Attempt the solution recommended for the given problem.
When a problem occurs while operating the set, the
f
(standby) indicator flashes first and then warning will be
indicated.
Cause
The lamp burns out or the
quality of the lamp is deficient.
The cover of the filter or the
lamp is removed.
The fan for cooling stops.
Internal heat builds up.
Indicator flashing patterns
The B indicator flashes twice then A flashes once.
Flashing continues in this manner.
The B indicator flashes three times then A flashes once.
Flashing continues in this manner.
The B indicator flashes four times then A flashes once.
Flashing continues in this manner.
The B indicator flashes five times then A flashes once.
Flashing continues in this manner.
If the lamp flashes in a way not described above, consult your nearest Sony service center.
A
B
Stabilizing the Projection TV
After setting up, secure the projection TV to a wall, etc., with the supplied brackets, for safety
purposes.
1
Mount the two supplied brackets with the screws to the upper rear side
of the projection TV.
2
Pass a strong cord or a chain through each bracket mounted in 1, and
then secure to a wall or a pillar, etc.
Bracket (supplied)
