54
BRAVIA Sync
Cannot find connected
BRAVIA
Sync HDMI
device
• Make sure that the
Control for HDMI
is set up on both the TV and the
optional device compatible with
BRAVIA
Sync (see page 25).
Second A/V receiver is not
listed on the
Device List
• Only one A/V receiver may be used with the
BRAVIA
Sync and
Control for HDMI
functions at one time (see page 43).
PC Input
No picture / No signal
• Confirm the PC is correctly connected to the TV with either the PC IN
(with an HD15 cable) or with the HDMI IN.
• Ensure the output signal from the PC is one of the formats listed on page
46.
• Turn the PC off. Confirm the PC connection and restart the PC. Plug-and-
play will auto-detect the TV and correctly set up PC timing.
• Verify the PC is not in standby or hibernation mode.
Poor Picture
• Adjust the resolution (see page 46).
• Adjust
Pitch
and
Phase
.
General
TV screen feels warm
• Due to the thin profile of this television, the heat generated by the LCD
panel backlight and supporting electronics will be more noticeable. This
is normal operation and not a cause for concern.
Wide Mode
changes
automatically
• The current
Wide Mode
setting is automatically replaced with the
4:3
Default
setting when you change the channel or video input, if
4:3
Default
in the
Screen
settings is set to other than
Off
. If you want to
lock in
Wide Mode
selected with
WIDE
on the remote control, set
4:3
Default
to
Off
in the
Screen
settings (see page 35).
• Check the
Auto Wide
option in the
Screen
settings (see page 35).
Suddenly the picture gets
smaller
• The picture gets smaller during the commercials due to the method in
which the provider broadcasts their content. When HD content channels
switch to SD content (commercials), the picture may be small with a
black border.
•
Auto Wide
will not expand the picture during these content changes since the
content information is regulated by the channel signal provider. You can
manually change the
Wide Mode
if you prefer (see page 27). This setting
will remain in effect until you change the channel or input or manually change
the
Wide Mode
again.
“Black box” on screen
• You have selected a text option and no text is available (see page 41). To
turn off this feature, set the
CC Display
option to
Off
. If you were
trying to select closed captioning, select
CC1
instead of
Text1-4
.
Condition
Explanation/Solution
