KDL-22BX325/32BX325/32BX326/32BX425/40BX425
5
SELF DIAGNOSIS FUNCTIONS
SELF DIAGNOSIS FUNCTION
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash. The number
of times the LED flashes translates to a probable source of the problem. A definition of the STANDBY LED flash indicators is listed in the
instruction manual for the user’s knowledge and reference. If an error symptom cannot be reproduced, the remote commander can be used to
review the failure occurrence data stored in memory to reveal past problems and how often these problems occur.
DIAGNOSTIC TEST INDICATORS
When an error occurs, the STANDBY LED will flash a set number of times to indicate the possible cause of the problem. If there is more than
one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
Self Diagnosis
Supported model
Number of times
Standby LED blinks Diagnostic Item
Possible Causes
Possible Location
NA
RGB_SEN
RGB Sensor ACK Error
NA
2
MAIN_POWER
Main Power
Over Voltage Protection
LIPS22 (Power) Board (KDL-22BX325 Only)
GT32 (Power) Board (KDL-32BX325/32BX326/32BX425 Only)
GT40 (Power) Board (KDL-40BX425 Only)
AUD_PROT
Audio Error Detection
DC_ALERT
DTT Error
4
BALANCER
Panel Balancer Error
NA
TCON ERR
TCON Error
HFR ERR
HFR Error
P_ID_ERR
Panel ID NVM Error
PANEL_POWE
Panel Error
6
BACKLITE
Backlight Error
LCD Panel
LIPS22 (Power) Board (KDL-22BX325 Only)
GT32 (Power) Board (KDL-32BX325/32BX326/32BX425 Only)
GT40 (Power) Board (KDL-40BX425 Only)
7
TEMP_ERR
Temperature Error
A Board
3
5
A Board
TCON Control MT Board
LVDS Connection
