Sony KDF-55WF655K, Service Manual

Page: 26 / 364

– 25 –
KDF-55WF655K/60WF655K
RM-KD001 RM-KD001
4-3. MEMORY WRITE CONFIRMATION METHOD
1. After completing all adjustments turn the set off with the Remote Commander and WAIT for the fans to turn off before proceeding to the
next step.
Note: It may take up to two minutes for the fans to stop.
Caution: To avoid over heating the lamp, do not unplug the set until the fans have stopped.
2. After the fans have stopped, unplug the set from the AC outlet, then plug the set back in the AC outlet.
3. To verify the changes repeat steps 2 through 5 from sections 2-1. Setting the Service Adjustment Mode and 2-2. Service Adjustment Mode
Memory.
4. To exit service mode, turn the power off.
Note: To restore the User Controls and Channel Memory settings to the preset factory conditions, put the set into service mode (step
2 from 2-1. Setting the Service Adjustment Mode), then press
8
then on the Remote Commander. The set will restart and
display the initial setup screen.
4-4. REMOTE ADJUSTMENT BUTTONS AND INDICATORS
1
(+)
3
1
Data value up
Write into
memory
Adjustment
item up
Category up
6 Data value down
5 Category down
Display Service Menue
RM-KD001
4
Adjustment
item down
8
Restore User Control
and Channel Memory
2