Sony KDE-42XBR950 - 42" Xbr Plasma Wega™ Integrated Television Operating Instructions Manual Download

Page: 52 / 135

Setup

Device with i.LINK

Using i.LINK Cables

This TV has three S400 i.LINK terminals (one in the front panel, and two in
the back panel). You can use the following i.LINK cables with this TV:

Connecting i.LINK Devices

To connect a digital i.LINK device (using only a digital signal)

Using an i.LINK cable (see page 50), connect the device’s i.LINK jack
to either of the TV’s i.LINK jacks.

To connect an i.LINK device that supports an EIA-775A connection

Using an i.LINK cable (see page 50), connect the device’s i.LINK jack
to either of the TV’s i.LINK jacks.

Using an A/V cable, connect the i.LINK device’s A/V output jacks to
the TV’s A/V input jacks (VIDEO 3).

Do not use cables other than the i.LINK cables listed above.

Before connecting this unit to i.LINK-compatible equipment,
read the instruction manual of the i.LINK device to be
connected.

Only one i.LINK cable should connect the TV and any given
i.LINK device.

Sony Model

Length

VMC-IL4415

1.5 meters

VMC-IL4435

3.5 meters

4-pin i.LINK cable

Summary of Contents for KDE-42XBR950 - 42" Xbr Plasma Wega™ Integrated Television








































































































































Search results

Summary of Contents for KDE-42XBR950 - 42" Xbr Plasma Wega™ Integrated Television

Reviews:

Related manuals for KDE-42XBR950 - 42" Xbr Plasma Wega™ Integrated Television

Brands by name

Popular brands

Sony KDE-42XBR950 - 42" Xbr Plasma Wega™ Integrated Television, Operating Instructions Manual

Search results

Summary of Contents for KDE-42XBR950 - 42" Xbr Plasma Wega™ Integrated Television

Reviews:

Related manuals for KDE-42XBR950 - 42" Xbr Plasma Wega™ Integrated Television

Brands by name

Popular brands