Sony KD-65X750F, Reference Manual

Page: 14 / 44

14 US
KD-65X750F, KD-55X750F only
1
Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
2
Detaching the Table-Top Stand from the TV.
To detach the Table-Top Stand from the TV, remove the screws.
Note
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on
the TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the
TV with the LCD panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
Screw (not supplied)
Wall-Mount Bracket
(not supplied)