background image

5

GB

D:\SONY TV\SY160152_KF PA RG\01_4684553121_GB\010COVTOC.fm

masterpage: Right

KD-55X8200E / 55X8000E / 49X8200E / 49X8000E / 43X8200E / 43X8000E / FW-55X8001E / 49X8001E

4-684-553-

12

(1)

• Place the TV in a humid or dusty space, 

or in a room with oily smoke or steam 
(near cooking tables or humidifiers). 
Fire, electric shock, or warping may 
result.

• Install the TV in places subject to extreme temperature, such as 

in direct sunlight, near a radiator or a heating vent. The TV may 
overheat in such condition which can cause deformation of the 
enclosure and/or TV malfunction.

• If the TV is placed in the changing room of 

a public bath or hot spring, the TV may be 
damaged by airborne sulfur, etc.

• For best picture quality, do not expose the screen to direct 

illumination or sunlight.

• Avoid moving the TV from a cold area to a warm area. Sudden 

room temperature changes may cause moisture condensation. 
This may cause the TV to show poor picture and/or poor colour. 
Should this occur, allow moisture to evaporate completely 
before powering the TV on.

Broken pieces:

• Do not throw anything at the TV set. The screen glass may break 

by the impact and cause serious injury.

• If the surface of the TV set cracks, do not touch it until you have 

unplugged the AC power cord (mains lead). Otherwise this may 
cause an electric shock.

When not in use

• If you will not be using the TV set for several days, the TV set 

should be disconnected from the AC power (mains) for 
environmental and safety reasons.

• As the TV set is not disconnected from the AC power (mains) 

when the TV set is just turned off, pull the plug from the AC 
power outlet (mains socket) to disconnect the TV set 
completely.

• Some TV sets may have features that require the TV set to be 

left in standby to work correctly.

For children

• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that they 

are not mistakenly swallowed.

If the following problems occur...

Turn off

 the TV set and unplug the AC power cord (mains lead) 

immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it checked by 
qualified service personnel.

When:

AC power cord (mains lead) is damaged.

Poor fitting of AC power outlet (mains socket).

TV set is damaged by being dropped, hit or having something 
thrown at it.

Any liquid or solid object falls through openings in the cabinet.

About LCD TV Temperature

When the LCD TV is used for an extended period, the panel 
surrounds become warm. You may feel hot when touching there 
by the hand.

Viewing the TV

• View the TV in moderate light, as viewing the TV in poor light or 

during long period of time, strains your eyes.

• When using headphones, adjust the volume so as to avoid 

excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision 

technology and 99.99 % or more of the pixels are effective, 
black dots may appear or bright points of light (red, blue, or 
green) may appear constantly on the LCD screen. This is a 
structural property of the LCD screen and is not a malfunction.

• Do not push or scratch the front filter, or place objects on top of 

this TV set. The image may be uneven or the LCD screen may be 
damaged.

• If this TV set is used in a cold place, a smear may occur in the 

picture or the picture may become dark. This does not indicate a 
failure. These phenomena disappear as the temperature rises.

• Ghosting may occur when still pictures are displayed 

continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in use. This 

is not a malfunction.

• The LCD screen contains a small amount of liquid crystal. Follow 

your local ordinances and regulations for disposal.

Handling and cleaning the screen surface/
cabinet of the TV set

Be sure to unplug the AC power cord (mains lead) connected to 
the TV set from AC power outlet (mains socket) before cleaning.
To avoid material degradation or screen coating degradation, 
observe the following precautions.
• To remove dust from the screen surface/cabinet, wipe gently 

with a soft cloth. If dust is persistent, wipe with a soft cloth 
slightly moistened with a diluted mild detergent solution.

• Never spray water or detergent directly on 

the TV set. It may drip to the bottom of the 
screen or exterior parts and enter the TV set, 
and may cause damage to the TV set.

• Never use any type of abrasive pad, alkaline/acid cleaner, 

scouring powder, or volatile solvent, such as alcohol, benzene, 
thinner or insecticide. Using such materials or maintaining 
prolonged contact with rubber or vinyl materials may result in 
damage to the screen surface and cabinet material.

• Do not touch the TV if your hand is covered in any chemical 

substance such as hand cream or sunblock.

• Periodic vacuuming of the ventilation openings is 

recommended to ensure proper ventilation.

• When adjusting the angle of the TV set, move it slowly so as to 

prevent the TV set from moving or slipping off from its table 
stand.

Optional Equipment

Keep optional components or any equipment emitting 
electromagnetic radiation away from the TV set. Otherwise 
picture distortion and/or noisy sound may occur.

Wireless Function of the unit

• Do not operate this unit near medical equipment (pacemaker, 

etc.), as this may result in the malfunction of the medical 
equipment.

• Although this unit transmits/receives scrambled signals, be 

careful of unauthorised interception. We cannot be responsible 
for any trouble as a result.

Precautions

Summary of Contents for KD-49X8000E





















Reviews: