![background image](http://html.mh-extra.com/html/sony/kd-32nx100u/kd-32nx100u_operating-instructions-manual_401068033.webp)
Additional information
31
Connecting additional equipment
The following illustration shows how to connect a wide range of equipment to the rear of your TV. Please note that the connecting
cables are not supplied.
1. After you have connected your equipment, press the
/
button on the remote control until the
correct symbol for your equipment appears on the TV screen (see table below).
Note:
to record digital programmes you must connect your VCR to the Scart socket
C
using a scart lead.
2. Switch on your equipment to view the signal.
3. Press the DIGITAL/
button when you wish to return to normal TV operation.
Connecting a VCR that supports Smartlink
The Smartlink system offers a direct link between the TV and VCR. If you have a Smartlink VCR, please
refer to those instructions for further information.
Note:
To operate correctly your VCR must be connected to the
C
socket of the TV using a fully wired 21 pin scart lead.
Connecting to external audio equipment
Plug in your Hi-Fi system to socket
D
if you wish to amplify the sound from the TV. The volume level can
still be adjusted using the volume button
on the remote control.
Connecting your MD/ DAT player
Plug in your MD/DAT player to socket
E
.
Connecting a modem
Connect your modem to the
F
socket and your telephone socket.
On screen symbol
Usage
For equipment connected to socket
A
For equipment connected to socket
B
For equipment connected to socket
C
1
2
3
MODE
REC
DIGIT
AL
DVD
VCR
PlayStation
Hi-Fi
Modem
MD/DAT
C
B
A
D
E
F
NX31-36.fm Page 31 Wednesday, September 5, 2001 9:39 AM