Sony Ipela SNT-EP104 User Manual Download Page 79

Page: 79 / 121

mini

tra

ting
t

un
it

Setting the Operations from the Viewer — Trigger Menu

FTP client

Checking this box allows you to select

FTP client

on the

Trigger panel in the main viewer.
By clicking

FTP client

a still image of the moment you

click is captured, and the image file is sent to the FTP
server.

When you click

FTP client

, the

Trigger-FTP client

menu is displayed. You can set the necessary options
here. The setting options and setting procedures are the
same as those of the FTP client menu (page 65).

Image memory

Checking this box allows you to select

Image memory

on the Trigger panel in the main viewer.
By clicking

Image memory

a still image of the moment

you click is captured, and the image file is recorded in
the built-in memory or USB memory (not supplied).

Click

Image memory

to display the

Trigger-Image

memory

menu. You can set the necessary options here.

The setting options and setting procedures are the same
as those of the Image memory menu (page 68).

Alarm output

Checking this box allows you to select

Alarm output 1

Alarm output 2

Alarm output 3

and

Alarm output 4

on the Trigger panel in the main viewer. You can control
the alarm output by clicking

Alarm output 1

Alarm

output 2

Alarm output 3

Alarm output 4

Note

This operation is not available on the SNT-EP104 or
SNT-EP154.

Select the alarm ouput control mode from

Toggle

Timer

Toggle:

Each time you run a trigger, On (short circuit)

or Off (open) is switched.

Timer:

When you run a trigger, the alarm output is

switched to On, and will automatically set to Off
after the time specified in

Duration

has elapsed.

Duration

When

Timer

is selected, specify the time for which the

alarm output remains off, from 1 to 300 seconds.

Voice alert 1, 2, 3

Checking this box allows you to select

Voice alert 1

Voice alert 2

Voice alert 3

on the Trigger panel in the

main viewer. You can output audio from the audio file
saved in the system by clicking

Voice alert 1

Audio file

Displays the name of the audio file saved in the system.
“Not uploaded” is displayed dimly if no audio file is
saved.

Notes

• This operation is not available on the SNT-EP104 or

SNT-EP154.

• Voice alert configuration is only available for CH1 on

the SNT-EX154.

OK/Cancel

See “Buttons common to every menu” on page 31.

Summary of Contents for Ipela SNT-EP104


























































































































Search results

Summary of Contents for Ipela SNT-EP104

Reviews:

Related manuals for Ipela SNT-EP104

Brands by name

Popular brands

Sony Ipela SNT-EP104, User Manual

Search results

Summary of Contents for Ipela SNT-EP104

Reviews:

Related manuals for Ipela SNT-EP104

Brands by name

Popular brands