A
d
mini
s
tra
ting
t
he
un
it
Configuring the System — System Menu
35
Superimpose Tab
Select whether to superimpose the camera ID and/or
date & time on the image or not.
The camera ID is also superimposed on images recorded
by the Pre-alarm or Post-alarm function.
Superimpose
On/Off
When using the Superimpose function, select
On
.
Font size
Set the font size.
Style
Set the items to superimpose and the format to display
in. Superimpose settings are available for the following
items:
•
Date:
Set the display setting for date.
•
Camera ID:
Configure the Camera ID display
setting.
•
Camera direction:
set the display of a camera
direction.
•
Event:
Configure the display setting for when an
event occurs.
•
Codec:
Configure the bit rate and frame rate display
settings display the codec of image 1.
•
Custom String:
Set Custom String to display the
text of your choice.
Display format, including color, can be individually set
for each item.
Color:
Select the font color of the superimposed text.
Brink:
Select
On
to enable brinking for the
superimposed text.
String Effect:
Enable a string effect for displayed text.
Advanced:
Click the
Setting
button in
Date
to
configure the format of date/time and the separator.
In
Camera ID
, you can configure the Camera ID
string setting and upload Superimpose Logo. Images
that can be used as a Logo must be in gif89a format
with an image size up to 320 × 60. The number of
pixels horizontally is even numbered and the
maximum file size is approximately 50 KB. The
Camera ID string and Superimpose Logo can be used
exclusively.
Superimpose format
Click
Edit
to edit the content to superimpose over each
display position.
Only one
Date
and one
Camera ID
can be specified for
the
Superimpose format
.
You can set the content to superimpose in the bottom
left, bottom right, top left, top right, center, top middle,
and bottom middle parts, respectively. However, if you
specify the top middle, superimposed content will not
appear on the top left or top right. Similarly, if you
specify bottom middle, superimposed content will not
appear in the bottom left or bottom right.
Click
Date & Time
,
Camera ID
,
Codec
,
Zoom
,
Camera Direction
or
Event
to insert the corresponding
tag into the string.
Camera Direction
In the Superimpose format, select the content that will
be replaced by a <direction> tag inserted when the
Camera Direction
is clicked.
Preset position
Checking here will display the preset name when the
camera faces the direction registered as preset.
Note
This operation is not available on the SNT-EP104 or
SNT-EP154.
OK/Cancel
