User-Friendly GUI
The SNC-RZ25 has a user-friendly GUI accessible via
a PC running the Microsoft
®
Internet Explorer
®
browser software. Setup is very easy with the
intuitive icons and pull-down menus. Directly
pointing to and clicking on any part of the monitor
image in the viewer will pan and tilt the camera so
that the selected point is centered. Also, selecting an
area on the image by holding down the left mouse
button and dragging the mouse diagonally will
enlarge and center the selected area in the monitor.
SAMPLE SYSTEM CONFIGURATION
Monitor
100Base-TX
LAN
SNC-RZ25N (NTSC)
SNC-RZ25P (PAL)
Video
Out
Passive Infrared
Sensor (PIR)
Sensor In
Microphone
Mic In
Speaker
Audio Line Out
Alarm Out
Motion Detection/IR Cont Out
Hard Disk Recorder
CF Type Card Slot
Compact Flash
Memory
SNCA-CFW1
(IEEE 802.11b)
SNC-RZ25 Viewer
Direct Pointing in Panorama View
The SNC-RZ25 can also be controlled by clicking on
the panorama
*7
image. Selecting an area on the
panorama view will center that area in the monitor.
*7
The panorama view is a still image. The SNC panorama
creator (supplied software) must be run to generate the
panorama image.
Flexible Installation
(Desktop or Ceiling Mountable)
A unique feature that "flips" images enables the
SNC-RZ25 to be placed on either a flat surface
(desktop) or ceiling mounted. Images are output
right-side-up regardless of the orientation of the unit.
Unlike other products that require separate models
for ceiling and desktop applications, this single model
is all that is necessary when installing your network
camera system.
(simulated image)
MK10175V2.qxd 05.6.16 2:58 PM Page 6
