O
per
at
ing
t
he
Came
ra
Recording a Still Image in the Memory of the Camera / Controlling Alarm output
27
Recording a Still Image
in the Memory of the
Camera
You can capture a camera image as a still image and
record it in the memory of the camera. “Memory”
contains Built-in memory and CF memory card, and you
can select one of them in the setting window.
To use this function, you need to make
Image memory
active and to set details of the image memory in the
Trigger setting menu on the Advanced mode menu
(page 61).
1
Monitor the image on the monitor window.
2
Select
Image memory
from the Trigger list box.
3
Click .
The still image of the moment when you click is
captured, and the image file is recorded in the
memory of the camera.
Controlling Alarm output
You can control the Alarm output On (short-circuit) and
Off (open).
To use this function, you need to make
Alarm output
active in the Trigger setting menu on the Advanced
mode menu (page 62).
1
Monitor the image on the monitor window.
2
Select
Alarm output
from the Trigger list box.
3
Click .
Each click switches the Alarm output between On
(short-circuit) and Off (open) alternately.
Tip
For the connection of peripheral devices to the Alarm
output of the I/O port, see the supplied Installation
Manual.
