A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Operations from the Viewer Page — Trigger setting Menu
62
FTP client
Checking this box allows you to select
FTP
from the
trigger drop-down list in the main viewer.
By selecting
FTP
and clicking
,
a still image of the
moment you click is captured, and the image file is sent
to the FTP server.
When you click
FTP client
button, the Trigger (setting)
FTP client menu is displayed. You can set necessary
options here. The setting options and setting procedures
are the same as those of the FTP client setting menu
(page 53).
Image memory
Checking this box allows you to select
Image memory
from the trigger drop-down list in the main viewer.
By selecting
Image memory
and clicking
, a still
image of the moment you click is captured, and the
image file is recorded in the built-in memory or CF
memory card.
For the verified cards, contact your authorized Sony
dealer.
When you click
Image memory
button, the Trigger
(setting) Image memory menu is displayed. You can set
necessary options here. The setting options and setting
procedures are the same as those of the Image Memory
setting menu (page 56).
Alarm output
Checking this box allows you to select
Alarm output
from the trigger drop-down list in the main viewer.
You can control On (short circuit ) or Off (open) by
selecting
Alarm output
and clicking the
.
One Time Tour
Checking this box allows you to select
One time tour
from the trigger drop-down list in the main viewer.
Select
One time tour
in the trigger box and click the
, then One time tour starts.
Up to 8 positions can be programmed, and the camera
moves to the programmed positions sequentially. The
camera stops when it moves to the last preset position.
Note
The One time tour will be stopped if you operate the
Pan/Tilt/Zoom function or change the camera setting
during One time tour operation.
When you click
One time tour
, One time tour setting
menu is displayed.
