Ot
her
s
Using the SNC toolbox
104
Viewer
A live image of the camera is displayed. You can specify
the position of the privacy mask in this area.
Number
The set mask number is displayed in the Viewer.
Frame
Display the frame of the set mask to distinguish the
mask area when the set mask is overlapped.
Panorama area
Display the panorama.
The set privacy mask is displayed by numbers on the
panorama. When the panorama is clicked, the camera
will focus on the place clicked.
Note
If a panorama image has not been created, the default
image is displayed.
PTZ controller
Allows you to pan, tilt and zoom the camera.
Pan/tilt operation
Click the arrows in the direction you want the camera
to move. Press and hold the arrows to move the
camera continuously.
Zoom operation
Click the
button to zoom out, click the
button to zoom in. Press and holf the button to zoom
continuously.
The zoom bar displays the current zoom position
with
Wide
at the right end, and
Tele
at the left end.
Click the
button to adjust the zoom to
Wide
,
Click the
button to adjust the zoom to
Tele
.
Privacy mask setting section
Allows you to set or delete the privacy mask.
Set:
Register the area specified on the viewer as a
privacy mask area.
Click
Set
and the portion of the viewer image is
masked with the privacy mask. The color of the
privacy mask is that selected with the
Color
drop-
down list.
Note
If the mask area is close to the bottom of the image, the
background at the bottom may still be visible.
Clear:
Click to delete the privacy mask.
Color
Specify the color or mosaic of privacy masks. This
setting is common to every privacy mask.
Clear All
Click to delete all privacy masks simultaneously.
Setting a privacy mask
To set a privacy mask in a desired position, do the
following:
1
Specify the privacy mask area by dragging the
mouse on the viewer.
2
Select the color or mosaic of the mask from the
Color
drop-down list.
Note
The color is common to every privacy mask. The
color last selected is applied.
3
Select the desired privacy mask number in the
privacy mask setting section, and then click
Set
of
the corresponding number.
The mask is displayed on the viewer.
Note
The mask cannot be set on the viewer by clicking
Set
if
the camera is tilted 65°.
Privacy mask setting range
The setting range of the privacy mask is limited as
follows:
Pan angle:
SNC-ER520/ER521/ER550/ER580/ER585/
ER585H/ZR550: No limit
SNC-EP520/EP521/EP550/EP580/ZP550: 340°
