A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Object Detection Function — Object detection Menu
71
Monitor display
Set the active/inactive window while monitoring an
image.
The outside of the active window and the inside of the
inactive window are regarded as inactive areas and
shown with a mesh screen.
Notes
• The image displayed on the monitor display has low
resolution.
• The colors and green frames shown in the monitor
display are not displayed on the image files that are
sent or recorded linked to the object detection
function.
Window 1 to Window 4 check boxes
When you check a check box, the corresponding
window (active or inactive window) appears on the
monitor display. You can change the position and size of
the window.
Active:
To use the window as an active area in which
moving object detection is performed.
Inactive:
To use the window as an inactive area in which
any moving object is ignored. Select
Inactive
to set
an inactive area inside an active window.
Note
You cannot set all four windows as
Inactive
windows.
Be sure to set one or more windows as
Active
window(s).
Threshold setting slider bar
Set the threshold level of moving object detection that is
common to all the windows.
The threshold level is used to judge whether or not there
has been any motion in the camera image. When the
motion of an object on the monitor screen has exceeded
the threshold level, the camera judges that there has been
a motion and a green frame is shown. An alarm is output
when a green frame is added to the object displayed in
one of the active windows.
Object size
Select the minimum size of a detectable object from
L
(Large),
M
(Medium) and
S
(Small).
Each option represents the corresponding size below:
L:
64 × 64 dots
M:
32 × 32 dots
S:
8 × 8 dots
Tip
The monitor display is 640 × 480 dots. Size
L
is 1/10 the
width of the monitor display.
OK button
Click to send the set values to the camera and confirm
the settings.
Note
Although the display on the monitor quickly responds to
the setting being performed as you change the size of a
window or a setting, you need to click the
OK
button to
confirm the setting. The setting will be cancelled if you
do not click the
OK
button.
To set the moving object detection
function
Set the moving object detection function as follows:
1
Select
Moving object
for
Detection
.
The setting items for moving object detection
appear.
2
Check the
Window 1
check box.
The
Window 1
frame appears on the monitor
display.
3
Adjust the position and size of
Window 1
.
Drag
Window 1
to move it and change its size.
4
Set the active or inactive windows.
Select
Active
to set
Window 1
as an active area, or
Inactive
to set it as an inactive area.
Active window
Inactive window
Summary of Contents for Ipela SNC-CS50N
Page 100: ...Sony Corporation ...
