176
Using Multiple Microphones
Using Multiple Microphones
You can input the stereo sound from two PCS-A1 (two are supplied with the
PCS-XG80 and one is supplied with the PCS-XG55) or PCSA-A3 (not
supplied) microphones to the system.
If you are using an echo canceling microphone, see “Using the PCSA-A7
Microphones (PCS-XG80/XG80S/XA80 only)” on page 179.
To connect the microphones
Connect the optional microphones to the MIC (A1/A3) 1 (R) and 2 (L) jacks
on the Communication System. Power is supplied to the microphones from the
System.
To use the connected microphones
Set “Audio Input” to “MIC” on the Basic Setup1 page of the Audio setup
menu, and set “Input Select (MIC)” to “MIC (A1/A3)” (page 77).
To input the stereo sound from two microphones, set “Input Mode” to “Stereo”
(page 79). Set it to “Monaural” to input monaural sound from two
microphones.
Notes on installation of the microphones
• Install microphone about 50 cm (1.6 ft) away from the participants.
• Place the microphone in a quiet, echo-free location.
TERMINAL
VISCA OUT
1
1(R)
(PLUG IN POWER)
2(L)
R
L
R
L
R
L
2
S VIDEO IN
RGB IN
RGB OUT
HDMI OUT
1-EXT-2
REC OUT
AUDIO OUT
AUDIO 1 IN
AUX CONTROL
2
CAMERA
EC-MIC(A7)
MIC(A1/A3)
1
DC 19.5V
ISDN UNIT
to MIC (A1/A3)
1 (R)
PCS-A1 (supplied with the PCS-XG80/XG55) or
PCSA-A3 microphone (not supplied)
Microphone (Left)
Microphone (Right)
to MIC (A1/A3)
2 (L)
Summary of Contents for IPELA PCS-XG55
Page 282: ...Sony Corporation ...
