133
Using External Microphone and Headphones
C
hap
te
r 4:
Vi
de
oco
n
fe
re
n
c
e W
ith
O
p
tio
nal
Equ
ipm
en
t
Using External Microphone and
Headphones
The microphone built in this system is assumed to be used to conduct a
conference among about three participants. You can connect the optional PCS-
A1 or PCSA-A3 microphone to the system, allowing more persons to
participate in the conference.
You can also connect headphones or headset to this system.
• To use the microphone connected to this system, set “Mic Select” to “Internal” in the
Audio Setup menu.
• The built-in microphone is disabled when an external microphone is connected.
• The built-in speakers are disconnected when headphones are connected.
Notes on installation of the microphones
• Install an external microphone more than 1 m (3.3 feet) away from this
system.
• Keep the microphone about 50 cm (19 3/4 inches) away from the
participants.
• Place the microphone in a quiet, echo-free location.
• Install microphones away from equipment that may cause noise.
• Avoid covering a microphone with paper, etc., or moving it. If you do either,
extreme noise and echo may be heard temporarily by the remote party. In this
case, wait until the echo disappears.
Notes
m
i
Right side
to
m
to
m
to
i
to
i
Headset (not supplied)
Headphones (not supplied)
PCS-A1 (not supplied) or PCSA-A3
microphone (not supplied)
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...
