125
Sending Motion Pictures as Still Images
C
hap
te
r 4:
Vi
de
oco
n
fe
re
n
c
e W
ith
O
p
tio
nal
Equ
ipm
en
t
Sending Motion Pictures as Still Images
You can send motion pictures shot by the Camera or those output from the
connected external equipment as still images.
When you are sending pictures that contain lots of text, it is recommended that
you send them as still images. The images become clearer than motion pictures
and the texts are easy to read.
While in communication with the remote party, you can send motion pictures
shot by the local camera as still images. You can send one still image or still
images continuously.
1
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
and select the
(still image) icon with the
V
or
v
button.
2
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select “Send”
or “Continuous Send”, then press the ENTER button.
3
Adjust the zoom and camera angle and press the ENTER button, if
necessary.
For details on the adjustments of the zoom and camera angle, see
“Adjusting the Zoom and Camera Angle” on page 102.
The motion picture displayed on the local party freezes, and a still picture will
be sent to the remote party. If you select “Send”, a still image is sent. When
transmission is finished, the message “The still image has been sent.” appears.
When “Continuous Send” is selected, still images are sent continuously. The
sending interval depends on the transmission rate and the image type.
Sending Still Images Using the Still Image Menu
Send
Continuous Send
Clear
Save
Still Image
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...
