36
Registering Local Information
This chapter describes the registration and
settings to be carried out by the system
administrator.The chapter is intended to be
read by the system administrator.
Registering Local
Information
Before starting a communication, register
the required information on the local
terminals of the system using the Setup
menu for administrator. This section
describes how to display the Setup menus
for the administrator and gives a
introduction to the menus.
1
Press the MENU button on the
Remote Commander, or use the
V
,
v
,
B
or
b
button to select “Menu” in the
launcher menu, then press the PUSH
ENTER button.
The Setup menu appears on the monitor
screen.
Menus available in the Setup
menu
Selecting the following items opens
their respective menus.
Dial:
Dial Setup menu (see page 37)
Answer:
Answer menu (see page 37)
Communication:
Communication
Mode menu (see page 38)
Status:
Status menu (see page 39)
Audio:
Audio Setup menu
(see page 41)
Video:
Video Setup menu
(see page 43)
General:
General Setup menu
(see page 47)
Administrator:
Administrator Setup
menu (see page 50)
LAN:
LAN Setup menu (see page 54)
Encryption:
Encryption Setup menu
Information:
Machine
Information
menu (see page 59)
2
Use the
V
,
v
,
B
or
b
button on the
Remote Commander to select the
menu you want to set, then press the
PUSH ENTER button.
The selected setup menu appears.
3
Set the respective items.
For details on individual items, see the
relevant menu pages.
4
After the setting is completed, use the
V
,
v
,
B
or
b
button to select “Save”,
then press the PUSH ENTER button.
The setting is saved, and the Setup menu
is restored.
Chapter 2:
Registration and
Setup for System
Administrators
Opening the Setup Menu
Dial
Setup
Communication
Audio
General
LAN
Answer
Status
Video
Administrator
Information
2005.12.28 12:34
Back
Encryption
Setup
Camera
Memory Stick
Dial Setup
Cancel
Save
2005.12.28 12:34
Off
1/1
More Options Enable
Page:
Off
Disable
User Name Input
Select LAN Prefix
LAN Prefix
