22
Preparing the System
To attach the filter to the remote control receiver
Peel off the paper from the rear of the supplied filter and paste the filter over
the remote sensor of the remote control receiver.
Most of the operations with the Video Communication System can be
controlled with the supplied Remote Commander.
1
Remove the battery compartment cover.
2
Insert two size AA (R6) batteries (supplied) with correct polarities into the
battery compartment.
Be sure to insert the batteries
E
side first. Inserting them forcibly
e
side first may
damage the insulated film covering the batteries and cause a short circuit.
Inserting Batteries into the Remote Commander
Note
Filter (supplied)
Remote sensor
