Sony IPELA NSR Series User'Smanual Download Page 43

Page: 43 / 137

Configuring Camera Video Settings

ap
te

r 4

pplic

tti

Configuring Camera
Video Settings

You can configure settings related to the images captured
from a camera.

Click [Device] at the top of the Configuration window,
and select the camera for which you want to configure
the settings for captured images.

The registration details of the selected camera appear.

Click the [Video] tab, and configure each item.

For details on each of the items, refer to

“Setting Items

of [Video] Tab” (page 43)

Click [Apply].

The settings are changed.

Setting Items of [Video] Tab

This tab allows you to change settings related to images
captured from the camera selected in the tree on the left.
After configuring each item, click [Apply] to save your
settings.

The setting items and selectable values differ depending on
the camera.

Video Channel

In the case of a camera server with multiple channels (SNT
series, etc.), the video channel to use is displayed.

E-Flip

Select the check box to enable the E-Flip function for
flipping the top and bottom of images output from the
camera.

Audio Channel

Select the analog camera audio channel to tie to the analog
camera.
You can also apply one setting to multiple analog cameras.

Schedule Record

Configure settings related to images for when scheduling
recording.

Codec

Set the image codec for the camera. Select JPEG or
MPEG4.

Image Size

Select the resolution for the camera.

Image Quality (for JPEG)

Select the image quality for images captured from the
camera.

Bit Rate (for MPEG4)

Select the bit rate for images captured from the
camera.

Frame Rate

Select the frame rate for images captured from the
camera.

Alarm/Event Record

Configure settings related to images for when recording an
alarm or event.

Codec

Set the image codec for the camera. Select JPEG or
MPEG4.

Image Size

Select the resolution for the camera.

Image Quality (for JPEG)

Select the image quality for images captured from the
camera.

Bit Rate (for MPEG4)

Select the bit rate for images captured from the
camera.

Note

Summary of Contents for IPELA NSR Series










































































































































Search results

Summary of Contents for IPELA NSR Series

Reviews:

Sony IPELA NSR Series, User'Smanual, Page: 43 / 137

Search results

Summary of Contents for IPELA NSR Series

Reviews: