Sony Ipela NSR-S10, User Manual, Page: 17 / 67

17
Controlling Cameras
Cha
p
te
r 2
O
per
at
ion
a
nd Cont
rol
Wide-angle/Telephoto Zoom
This controls zooming between wide-angle and
telephoto views.
[W] is for wide-angle (zoom out), and [T] is for
telephoto (zoom in).
Pan/Tilt
This moves the camera up, down, left, or right.
If an analog camera equipped with pan, tilt, and zoom
functions is connected to an SNT-EX series unit, these
functions of the analog camera cannot be controlled by
the NSR.
Preset
This moves the camera to the selected preset position.
For details on this operation, refer to
“Using Camera
Presets” (page 17) .
I
(Event Log)
This displays the event/operation/system/network history.
J
(Save)
This exports the image currently displayed as a still image file.
Still images are exported in JPEG format.
K
(System Setup)
This displays the “Setup” screen.
L
(Alarm Status)
This displays the status and history of alarms.
To release an alarm condition, click this button and then
click [Reset] in the “Alarm Status” screen that appears.
M
(Keyboard)
This displays the soft keyboard that is used to input text.
N
(Record)
This starts or stops the recording of camera images
according to the recording mode configured in the
“Recording Setting” screen.
Under default settings, recording starts automatically at
system startup.
O
(Exit)
This allows you to reboot, power off, or log on as a
different user.
P
Status display
This displays the current date and time, and the current
hard disk capacity.
Controlling Cameras
You can move the camera to preset positions stored in the
camera.
Using Camera Presets
You can move the camera to preset positions stored in the
camera. You can also configure a new preset position.
1
Select the monitor frame displaying the images from
the camera that you want to control.
2
Using [Preset], select the desired preset number and
then click [Go].
The camera moves to the preset position.
Configuring a New Preset Position
These settings are only available for cameras with a
function for configuring preset positions.
1
Select the monitor frame displaying the image from
the camera for which you want to configure the preset
position.
2
Adjust the camera position using the pan, tilt, and
zoom operations while watching the image.
Caution