A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory Menu
55
Common Tab — Setting the image
memory function
Image memory
To use the image memory function, select
On
.
For the SNC-DF50
Built-in memory
The current memory space of the built-in memory is
displayed.
For the SNC-DF85/DF80
Selected root directory
Select a memory in which you want to save an image.
The current memory space is displayed on the right.
Built-in memory:
Built-in memory of this camera
CF memory card:
CF memory card inserted into the
CF card slot of the camera.
Notes
• The image and audio files recorded in the built-in
memory are deleted when the
Selected root directory
setting is changed.
• When
Selected root directory
is set to
CF memory
card
, “empty” is displayed in the memory space box
and you cannot access the built-in memory.
Overwrite
Select
On
to overwrite the file or not when there is
insufficient memory space to record the image in the
memory.
On:
Overwrite is enabled and old files will be
overwritten in the order of date.
Off:
Overwrite is prohibited. No recording will be
performed.
Capacity warning
Select
On
to send a warning mail to the Administrator
when the memory is full. Select
Off
if you do not want
to send a warning mail.
Note
When
Overwrite
is set to
On
, a warning mail is not sent
to the Administrator.
SMTP server name
Type the name of the SMTP server for sending an e-
mail, using up to 64 characters.
Otherwise type the IP address of the SMTP mail server.
Authentication
Select the authentication required when you send an e-
mail.
Off:
Select if no authentication is required when an e-
mail is sent.
On:
Select if authentication is required when an e-mail
is sent.
Select one of the authentication methods from the
following and specify the
POP server name
,
User
name
and
Password
as required.
SMTP:
Select when SMTP authentication is
required.
POP before SMTP:
Select when POP before SMTP
authentication is required.
Note
When you set
Authentication
to
On
, be sure to select
either or both
SMTP
or/and
POP before SMTP
.
POP server name
This is necessary when
POP before SMTP
is selected
for
Authentication
.
Type a POP (receiving mail) server name using up to 64
characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server that sends e-
mails performs authentication using the POP user
account.
User name, Password
Type the user name and the password of the user who
owns the e-mail account. This setting is necessary when
the SMTP server that sends e-mails performs
authentication.
Administrator e-mail address
Type the e-mail address of the recipient of a warning
mail (e-mail address of the camera Administrator),
using up to 64 characters.
OK/Cancel
