116
Chapter 5 Settings
1
Display the “VMF” screen, and click [Add] at the top right of the screen.
The “Add VMF Package” screen appears.
2
Select a “Moving” package or an “Unattended” package, and then click
[OK].
The package is added to the list, and the VMF configuration screen appears.
Note
The package name is created automatically at this point.
3
Configure each item.
A VMF package consists of a combination of up to 3 filters (motion
detection criteria), with advanced settings for each filter, and up to 6
inactive areas.
Follow the steps below to configure filters and inactive areas.
(1) Set the filter name and filter type (
1
).
(2) Click
(
2
) under area
1
, and configure
the criteria in area
3
.
Make sure to click
under the desired
filter or inactive area before configuring criteria.
Clicking
(Off) switches the button to
(On), which enables you to configure
the filter criteria.
