106
2-14. LC-1052 Board
Preparation
1. Remove the top cabinet and the bottom cover. (Refer to “2-2. Top Cabinet, Bottom Cover”.)
2. Remove the inside panel. (Refer to “2-3. Inside Panel”.)
3. Remove the outside panel. (Refer to “2-4. Outside Panel”.)
4. Remove the VC-1046 board. (Refer to “2-5. VC-1046 Board”.)
5. Remove the CK-1027 board. (Refer to “2-8. CK-1027 Board”.)
6. Remove the VF-1024 board. (Refer to “2-10. VF-1024 Board”.)
7. Remove the JK-1029 board. (Refer to “2-11. JK-1029 Board”.)
8. Remove the rear assembly. (Refer to “2-12. Rear Assembly”.)
Procedure
1. Release the two holes of the flexible board from the bosses.
2. Remove the three screws, and then remove the LC-1052 board.
3. Disconnect the flexible board from the connector (CN1200) on the LC-1052 board.
4. Install the removed parts by reversing the steps of removal.
P1.7 x 3
Hole
Holes
CN1200
Bosses
Boss
A
View on arrow A
LC-1052 board
Flexible board
Bosses and holes
Flexible board