Sony ILCE-7RM3, Help Manual

Page: 247 / 464

Help Guide
Interchangeable Lens Digital Camera
ILCE-7RM3
α7RIII
Using flash (sold separately)
In dark environments, use the flash to light up the subject while shooting. Also use the flash to prevent camera-shake.
For details on the flash, refer to the instruction manual for the flash.
Note
The light of the flash may be blocked if the lens hood is attached and the lower part of a recorded image may be shaded. Remove the lens hood.
When using the flash, stand 1 m or more away from the subject.
You cannot use the flash when recording movies. (You can use an LED light when using a flash (sold separately) with an LED light.)
Before attaching/removing an accessory such as a flash to/from the Multi Interface Shoe, turn off the product first. When attaching an accessory,
make sure that the accessory is fixed securely to the product.
Do not use the Multi Interface Shoe with a commercially available flash that applies voltage of 250 V or more or has the reverse polarity of the
camera. Doing so may cause a malfunction.
You can use a flash of the reverse polarity with the Sync Terminal. Please use a flash with a sync voltage of 400 V or less.
Attach the flash (sold separately) to the product.
1
Shoot after you have turned on the flash and it is fully charged.
blinking: Charging is in progress
lit up: Charging is finished
The available flash modes depend on the shooting mode and function.
2
211