Sony ILCE-3000K, Service Manual

Page: 3 / 46

ILCE-3000K/3500J_L3
2-1
2. REPAIR PARTS LIST
A-1923-785-A BT-2002 FLEXIBLE BOARD, COMPLETE
******************************
< CONNECTOR >
CN001 1-816-655-61 CONNECTOR, FFC/FPC 8P
A-1954-964-A SERVICE, MECHA DEVICE (1100)
(Not supplied) IS-1007 BOARD, COMPLETE
**********************
(All mounted parts and IS-1007 COMPLETE BOARD are not supplied, but they are
included in MECHA DEVICE (1100) (SERVICE).)
1-885-294-11 IS-105 FLEXIBLE BOARD
*******************
1-887-267-11 IS-1006 FLEXIBLE BOARD
********************
1-888-083-11 HB-1002 FLEXIBLE BOARD
*********************
A-1957-985-A LC-1012 FLEXIBLE BOARD, COMPLETE
******************************
(IC002 is not supplied, but this is included in LC-1012 FLEXIBLE COMPLETE BOARD.)
< CAPACITOR >
C001 1-116-737-11 CERAMIC CHIP 1uF 20% 10V
C002 1-116-717-11 CERAMIC CHIP 10uF 20% 10V
C003 1-118-039-11 CERAMIC CHIP 1uF 10% 25V
C004 1-118-039-11 CERAMIC CHIP 1uF 10% 25V
C101 1-116-729-11 CERAMIC CHIP 2.2uF 20% 10V
C102 1-116-734-11 CERAMIC CHIP 1uF 20% 16V
*
C103 1-116-738-11 CERAMIC CHIP 1uF 10% 6.3V
C104 1-116-729-11 CERAMIC CHIP 2.2uF 20% 10V
C105 1-116-737-11 CERAMIC CHIP 1uF 20% 10V
C106 1-116-737-11 CERAMIC CHIP 1uF 20% 10V
C107 1-114-098-91 CERAMIC CHIP 2.2uF 20% 25V
C108 1-116-734-11 CERAMIC CHIP 1uF 20% 16V
C109 1-116-729-11 CERAMIC CHIP 2.2uF 20% 10V
C110 1-116-729-11 CERAMIC CHIP 2.2uF 20% 10V
C111 1-100-743-91 CERAMIC CHIP 2.2uF 20% 16V
< CONNECTOR >
*
CN001 1-816-649-51 FFC/CONNECTOR, FPC (LIF) 22P
*
CN101 1-821-503-11 CONNECTOR, FPC (ZIF) 39P
< IC >
*
IC001 6-719-358-01 IC MM3416A25URE
IC002 (Not supplied) IC MM3416A48URE
< COIL >
*
L101 1-481-102-21 INDUCTOR 10uH
Ref. No. Part No. Description
< RESISTOR >
R008 1-218-941-81 METAL CHIP 100 5% 1/16W
R106 1-218-941-81 METAL CHIP 100 5% 1/16W
< COMPOSITION CIRCUIT BLOCK >
RB114 1-234-375-21 RES, NETWORK 1K (1005X4)
A-1959-442-A MIS-2002 FLEXIBLE BOARD, COMPLETE
*******************************
(CN001 is not supplied, but this is included in MIS-2002 FLEXIBLE COMPLETE
BOARD.)
< CONNECTOR >
CN001 (Not supplied) CONNECTOR (SHOE)
A-1957-983-A RL-1023 FLEXIBLE BOARD, COMPLETE
*******************************
(S007 is not supplied, but this is included in RL-1023 FLEXIBLE COMPLETE BOARD.)
< BATTERY HOLDER >
BH001 1-251-928-21 SOCKET, BATTERY
< BATTERY >
BT001 1-756-134-15 BATTERY, LITHIUM (SECONDARY)
< DIODE >
D001 6-502-887-01 DIODE SCM-J14DTT96
< RESISTOR >
R001 1-218-949-11 METAL CHIP 470 5% 1/16W
R006 1-218-369-11 METAL CHIP 2.2K 5% 1/2W
R101 1-218-955-11 METAL CHIP 1.5K 5% 1/16W
R102 1-218-956-11 METAL CHIP 1.8K 5% 1/16W
R104 1-218-961-11 METAL CHIP 4.7K 5% 1/16W
R105 1-218-964-11 METAL CHIP 8.2K 5% 1/16W
R106 1-218-967-11 METAL CHIP 15K 5% 1/16W
R107 1-218-972-11 METAL CHIP 39K 5% 1/16W
R133 1-218-957-11 METAL CHIP 2.2K 5% 1/16W
< SWITCH >
S001 1-798-420-11 SWITCH, DETECTION
*
S002 1-798-136-21 TACTILE SWITCH
*
S003 1-786-914-51 SWITCH, TACTILE
S004 1-786-914-31 SWITCH, TACTILE
S005 1-786-148-11 SWITCH, PUSH (1 KEY)
S006 1-786-914-31 SWITCH, TACTILE
S007 (Not supplied) SWITCH, ROTARY
< THERMISTOR >
TH001 1-804-949-11 THERMISTOR, NTC (SMD)
Ref. No. Part No. Description
2-2. ELECTRICAL PARTS LIST
BT-2002 IS-1007 IS-105 IS-1006 HB-1002 LC-1012 MIS-2002 RL-1023
NOTE:
• -XX, -X mean standardized parts, so they may have some differ-
ences from the original one.
• Items marked “ * ” are not stocked since they are seldom required for
routine service. Some delay should be anticipated when ordering
these items.
• The mechanical parts with no reference number in the exploded
views are not supplied.
• Due to standardization, replacements in the parts list may be dif-
ferent from the parts specified in the diagrams or the components
used on the set.
• CAPACITORS:
uF:
μ F
• COILS
uH:
μ H
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F:
nonflammable
• SEMICONDUCTORS
In each case, u:
μ , for example:
uA...: μ A... , uPA... , μ PA... ,
uPB... , μ PB... , uPC... , μ PC... ,
uPD..., μ PD...
The components identified by mark
0
or dotted line with mark
0
are critical
for safety.
Replace only with part number specified.
Les composants identifiés par une
marque
0
sont critiques pour la sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
When indicating parts by reference
number, please include the board name.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Note: Be sure to read “Precautions for Replacement of Imager”
on page 6-1 when changing the imager.
注意
如果电池更换不当会有爆炸危险。
只能用同样类型或等效类型的电池来更换。
务必按照说明处置用完的电池。