Sony ICD-UX560, Help Manual

Page: 253 / 258

Help Guide
IC Recorder
ICD-UX560 / ICD-UX560F / ICD-UX565F
List of messages
HOLD... Slide HOLD Switch to Activate.
All the buttons are disabled because your IC recorder is in the HOLD state to prevent unintentional operations. Slide the
POWER
·
HOLD switch to the center dot to release the IC recorder from the HOLD state.
(See Releasing the IC recorder from the HOLD state .)
System Error - Restart This Device
A system error was detected for some reason. Slide the POWER
·
HOLD switch to “POWER” and holding it for 8 seconds or
longer to restart your IC recorder.
(See
Restarting the IC recorder .)
Low Battery Level
You cannot format the memory or delete all the files in a folder because of insufficient battery power. Charge the battery.
(See
Charging the battery with a computer .)
Charge Battery
The battery is exhausted. Charge the battery.
(See
Charging the battery with a computer .)
SD Card Error
An error was detected when you inserted a microSD card into the microSD card slot. Remove the microSD card and insert it
once again. If this message keeps appearing, use a new microSD card.
The microSD card is write-protected. Unlock the microSD card.
You inserted a read-only microSD card. You cannot use the read-only microSD card on your IC recorder.
Memory Full
The remaining capacity of the built-in memory or the microSD card is insufficient. Delete some files and repeat the recording once
again.
(See
Deleting a file .)
File Full
The sum of folders and files or the total number of files has reached the limit. You cannot create any more files. Delete some files
and create the file once again.
(See
Deleting a file .)
Settings are Full
237