ModelName: ICD‑TX50
PartNumber: 4‑300‑042‑11(1)
110
110
Troubleshooting
The IC recorder is not recognized by your computer. A folder/file cannot be
transferred from your computer.
Disconnect the IC recorder from your computer and reconnect it.
Do not use a USB hub or USB extension cable. Use the supplied USB connecting
cable to connect the IC recorder to your computer.
Operation is not guaranteed if you use any system requirements other than those
described on page 99.
Depending on the USB port position, the IC recorder may not be recognized. If this
happens, try another port.
The file transferred from your computer cannot be played back.
The IC recorder can recognize up to 8 levels of folders transferred to the IC
recorder.
The file format may differ from those that can be played back using the IC recorder
(LPCM(.wav)/MP3(.mp3)/WMA(.wma)/AAC‑LC(.m4a)). Check the compatible
file formats (
p. 101).
The computer cannot start.
If you reboot the computer with the IC recorder connected to the computer, the
computer may freeze or may not start properly.
Disconnect the IC recorder from the computer and reboot the computer.
On the Sound Organizer
Refer to the help files of the Sound Organizer software, too.
The Sound Organizer software cannot be installed.
The free disk or memory space on the computer is too small.
Check the hard disk and memory space.
You are trying to install the software into the operating system that the Sound
Organizer software does not support.
Install the software into the supported operating system (
p. 91).
In Windows XP, you have logged on using a user name belonging to a user account
with limitations. Or in Windows Vista or Windows 7, you have logged on using a
guest account.
Make sure to log on using a user name with computer administrator privileges.
Continued