IC Recorder
ICD-SX733/SX734/SX1000
Adjusting the playback speed and tones – the DPC
(Digital Pitch Control) and the key control function
You can adjust the playback speed in a range from 0.25 times to 3.00 times. The
file is played back in natural tones by means of a digital processing function.
Moreover, you can adjust the playback sounds in semitones higher or lower, each
in 6 steps. This is useful for practicing songs to recorded accompaniment.
You can also change the playback speed while the “Transcription Playback Mode” is
active.
1. Slide the DPC (SPEED)/KEY CTRL switch to “ON.”
2. During playback, press
or
to enter the DPC setting mode.
3. Press
or
to adjust the playback speed.
The speed decreases by 0.05 times (from ×0.25 to ×1.00).
The speed increases by 0.10 times (from ×1.00 to ×3.00).
When you press and hold each button, you can change the speed continuously.
The playback speed is set to “×0.70” when you purchase the IC recorder.
4. Press
or
to adjust the playback tone (key control).
The playback tone is adjusted by a halftone higher ( 1 - 6).
The playback tone is adjusted by a halftone lower ( 1 - 6).
The playback tone is set to “0” when you purchase the IC recorder.
A: Current setting
B: DPC setting
C: Key control setting
5. Press
to exit the setting mode.
Note
162
Search
