IC Recorder
ICD-SX733/SX734/SX1000
Disconnecting the IC recorder from your computer
Follow the procedures below; otherwise, when the IC recorder contains data files,
the files may be damaged or become unplayable.
1. Make sure that the access lamp does not light.
2. Perform the following operation on your computer.
On the Windows taskbar at the bottom right of the desktop, left-click the
following icon.
Then, left-click “Eject IC RECORDER” (Windows 7, Windows 8), or “Safely
remove USB Mass Storage Device” (Windows XP, Windows Vista). The icon
and menu displayed can be different on different operating systems. The icon
may not be always displayed on the taskbar depending on your computer
settings.
On a Mac screen, click the removal icon of the “IC RECORDER” that appears
on the sidebar of the Finder.
3. Disconnect the IC recorder from the USB port of the computer, and slide the
USB DIRECT slide lever in the direction of the arrow to retract the USB
connector.
Note
The illustrations used in this Help Guide are based on the ICD-SX1000 model. These
illustrations may look different from the model you are using, however, the buttons
and controls used for operations are the same.
Hint
For details on disconnecting the IC recorder from your computer, refer to the
operating instructions supplied with your computer.
Related Topic
Recharging the battery
Connecting the IC recorder to your computer
98
Search
