26
GB
Combining messages by erasing the index
You can combine two messages into one by erasing the index.
In stop mode, follow the steps below:
1
Press
.
or
>
to display the number of the
second of the two messages you want to combine.
2
While pressing ERASE, press INDEX for more than 1
second.
“ID ERASE” will flash for 10 seconds.
3
Press ERASE while the display is flashing.
The two messages are combined into one and the
messages will be renumbered as in the illustration
above.
To cancel erasing
Press
x
STOP before step 3.
Notes on adding/erasing index
When recording with an IC recorder, the following symptoms may occur
because of the limitation of the system, however, they are not malfunction.
• If you add/erase indexes frequently, the unit may become unable to add/
erase indexes.
•You cannot add an index in the first or the last 1 second (2 seconds in LP
mode) of a message.
Message 1 Message 2 Message 3 Message 4 Message 5
Message 1
Message 2
Message 3 Message 4
The message numbers decrease.
An index
is erased.
Dividing a Message into Two/Combining
Messages — Index Function (continued)
Summary of Contents for ICD-R100 Operating Instructions (primary manual)
Page 49: ...Additional Information 49GB ...