Sony ICD-PX512 Operating Instructions Manual Download

Page: 129 / 148

129

ou
bl

es
h

oo
tin

Sound Organizer

Refer to the help files of the Sound Organizer software, too.

Symptom

Cause/Remedy

The Sound Organizer
software cannot be installed.

• The free disk or memory space on the computer is too small.

Check the hard disk and memory space.

• You are trying to install the software into the operating system

that the Sound Organizer software does not support. Install the
software into the supported operating system (page 105).

• In Windows XP, you have logged on using a user name belonging

to a user account with limitations. Or in Windows Vista or
Windows 7, you have logged on using a guest account. Make sure
to log on using a user name with computer administrator
privileges.

The IC recorder cannot be
properly connected.

• Check that the installation of the software has been successful.

Also check the connection as follows:
– When using an external USB hub, connect the IC recorder

directly to the computer or use the supplied USB connection
support cable.

– Disconnect and then connect the IC recorder.
– Connect the IC recorder to another USB port.

• Your computer may be in the system standby/hibernate mode. Do

not let your computer enter into the system standby/hibernate
mode while being connected to the IC recorder.

• Save a backup copy of all of the data stored on the built-in

memory or the memory card, and then format the built-in memory
or the memory card using the formatting function in the menu
(page 91).

Summary of Contents for ICD-PX512





















































































































































Search results

Summary of Contents for ICD-PX512

Reviews:

Related manuals for ICD-PX512

Brands by name

Popular brands

Sony ICD-PX512, Operating Instructions Manual

Search results

Summary of Contents for ICD-PX512

Reviews:

Related manuals for ICD-PX512

Brands by name

Popular brands