IC Recorder
ICD-PX333/PX333F
Copying a file to the other memory
You can copy files between the built-in memory and a memory card, which is
useful in saving a backup. Before starting the operation, insert a memory card to
be used for copying into the memory card slot.
1. Select the file you want to copy.
When you want to copy a file from a memory card to the built-in memory, set
the source memory media to “Memory Card.”
2. In the stop mode, select DISP/MENU - “Move & Copy” - “File Copy,” and then
press
PLAY/STOP
·
ENTER.
The “Copy to Memory Card” or the “Copy to Built-In Memory” appears and the
folder selection window is displayed.
3. Press –
or
+ to select the folder that you want to copy the file into, and
then press
PLAY/STOP
·
ENTER.
The “Copying...” animation appears and the file is copied as the last file in the
destination folder. A file will be copied with the identical file name.
4. Press
(stop) to exit the menu mode.
Note
Before starting to copy the target file, make sure to check the battery indicator.
If the batteries are weak, you may not be able to copy files.
If the remaining memory capacity of the destination memory media is
insufficient, you may not be able to copy files.
You cannot copy the podcast files.
Do not remove or insert a memory card, or turn off the IC recorder while
copying. Files may be damaged.
Hint
To cancel the copy operation, press
(stop) before step 3.
To cancel the copy operation during copying, press
(stop) while the
“Copying...” animation is displayed in step 3.
147
Search
