manualshive.com logo in svg

Sony ICD P620 - 512 MB Digital Voice Recorder, Operating Instructions Manual, Page: 16 / 56

Share
Download
Sony ICD P620 - 512 MB Digital Voice Recorder Operating Instructions Manual Download Page 16

ICD-P620 GB 3-295-268-11 (2)

1

GB

Remaining memory indication

During recording, the remaining memory 

indicator decreases one by one. 

The memory is 

nearly full. 

Flashing

When the remaining time of recording 

reaches 5 minutes, the last one of the 

indication flashes. 

If the remaining recording time display 

mode is selected, the remaining 

recording time display will also flash 

when the remaining time reaches 1 

minute.

When the memory is full, recording 

automatically stops and “FULL” will flash 

in the display window with an alarm 

sound. To continue recording, first erase 

some of the messages.

Notes

If you press 



REC when the memory is 

full, “FULL” will flash with an alarm sound. 

Erase some of the messages before you start 

recording again. 
If you press 



REC after you have recorded 

99 messages, “FULL” will flash with an alarm 

sound. Select another folder or erase some 

of the messages.

Summary of Contents for ICD P620 - 512 MB Digital Voice Recorder

























































Reviews:

No comments