Turning off the Beep Sound
BEEP ON:
A beep will sound to indicate that operation
has been accepted.
BEEP OFF: No beep sound will be heard except for the
alarm and timer.
1
Press DISPLAY/MENU for more
than 1 second until “MODE”
appears in the display window.
2
Press –
.
or
>
+ to display
“BEEP ON (or OFF)” and press
Nx
PLAY/STOP.
“ON (or OFF)” will flash.
3
Press –
.
or
>
+ to select
“ON” or “OFF” and press
Nx
PLAY/STOP.
The setting is completed.
4
Press
x
STOP to exit the menu
mode.
Changing the Recording Mode
HQ: You can record with the high quality sound
(monaural sound).
SP:
You can record with better sound (monaural sound).
LP: You can record for longer time (monaural sound).
1
Press DISPLAY/MENU for more
than 1 second until “MODE”
appears in the display window.
2
Make sure that “MODE” is
displayed and press
Nx
PLAY/
STOP.
“HQ (or SP, LP)” will flash.
3
Press –
.
or
>
+ to select
“HQ”, “SP” or “LP” and press
Nx
PLAY/STOP.
Now the setting is completed.
4
Press
x
STOP to exit the menu
mode.
The setting becomes effective and
the normal screen will be
displayed.
If the unit is left unoperated for
more than 3 seconds, the display
will show the current time and the
selected recording mode will be
displayed.
Playing Back All Messages in a
Folder Continuously
CONT ON: You can play back all messages in a folder
continuously.
CONT OFF: Playback stops at the end of each message.
1
Press DISPLAY/MENU for more
than 1 second until “MODE”
appears in the display window.
2
Press –
.
or
>
+ to display
“CONT” and press
Nx
PLAY/
STOP.
“OFF (or ON)” will flash.
3
Press –
.
or
>
+ to select
“ON” or “OFF” and press
Nx
PLAY/STOP.
Now the setting is completed.
4
Press
x
STOP to exit the menu
mode.
Turning off the OPR Indicator
(LED)
During recording and playback, the OPR (operation)
indicator lights or flashes. You can set the OPR indicator
to turn off even in operation.
1
Press DISPLAY/MENU for more
than 1 second until “MODE”
appears in the display window.
2
Press –
.
or
>
+ to display
“LED” and press
Nx
PLAY/STOP.
“ON (or OFF)” will flash.
3
Press –
.
or
>
+ to select
“OFF” and press
Nx
PLAY/STOP.
Now the setting is completed.
4
Press
x
STOP to exit the menu
mode.
Note
When the IC recorder is connected to the USB connector of
your computer, the OPR indicator always flashes regardless of
the menu setting.
B
Various Ways of Recording
Adding a Recording
Using an Adding Recording
At a factory setting, you cannot add a recording not to
erase the message by accidental operation. If you want to
add a recording to a previously recorded message or add
an overwrite recording, change the REC-OP setting in the
procedures below.
1
Press DISPLAY/MENU for more
than 1 second until “MODE”
appears in the display window.
2
Press –
.
or
>
+ to display
“REC-OP” and press
Nx
PLAY/
STOP.
The adding recording window will
be displayed.
3
Press –
.
or
>
+ to select
“ON” and press
Nx
PLAY/STOP.
The setting is changed.
4
Press –
.
or
>
+ to select
“ADD” or “OVER” and press
Nx
PLAY/STOP.
•ADD: adds a recording to a
previously recorded message
•OVER: adds an overwrite recording.
5
Press
x
STOP to exit the menu
mode.
To prohibit to add a recording
In step 3 , select “OFF” and press
Nx
PLAY/STOP.
Adding a Recording to a Previously
Recorded Message
You can add a recording to the message being played
back.
When “ADD” is selected in the menu
The added recording will be placed after the current
message and counted as a part of the message.
When “OVER” is selected in the menu
You can add an overwrite recording after the selected
point in a recorded message. The part of the message after
the selected point is deleted.
1
During playback, press and hold
zX
REC/PAUSE.
The “REC” indication appears.
“ADD” or “OVER” will flash and
the unit stops in the recording
pause mode.
2
While the “ADD” or “OVER”
flashes, press
zX
REC/PAUSE
again.
The OPR indicator will light in red. An add or
overwrite recording starts.
3
Press
x
STOP to stop the recording.
Notes
• You cannot add or overwrite a recording if the remaining
memory is not long enough.
• The added or overwritten portion of a message will be
recorded in the same recording mode (HQ, SP, or LP).
Recording with an External
Microphone or from Other
Equipment
1
Connect a plug-in-power type microphone or
other equipment to the (microphone) jack.
When recording with an external
microphone
When you connect an external microphone, the built-in
microphone is automatically cut off. When a plug in
power type microphone is connected, power is
automatically supplied to the microphone from the IC
recorder.
When recording from other equipment
2
Follow the steps in “Recording Messages” on
the front side to record messages.
Notes
• Make sure that the plugs are connected securely.
• We recommend you make a trial recording to check the
connections and volume control.
• When connecting equipment other than Sony’s, refer to the
instruction manual of the equipment.
B
Other Functions
Dividing a Message
You can divide a message during recording or playback,
so that the message is divided into two and the new
message number is added to the divided message. By
dividing a message, you can easily find the point you
want to play back when you make a long recording such
as a meeting.
You can divide messages until the total number of
messages in the folder becomes 99.
While recording or playing back a message, press
DIVIDE at the point you want to divide.
•
When you press DIVIDE during recording:
The new message number is added at
the point you pressed the button, and
the new message number and “DIVIDE“
flash three times. The message will be
divided into two; however, the messages
will be recorded without a break.
Message 1 Message 2 Message 3
A message is divided.
Recording continues
1
Tip
You can divide a message during recording pause.
•
When you press DIVIDE during playback:
The message is divided into two at the
point you pressed the button, and the
new message number and “DIVIDE“
flash three times. The message
numbers of the following messages
will increase by one.
Message 1
Message 2
Message 3
A message is divided.
Message 1
Message 2
Message 3
Message 4
The message numbers increase.
To play the divided message
Press –
.
or
>
+ to display the message number as the
divided messages each have message numbers.
1
To play the divided messages continuously
Select “ON” for CONT in the menu as described in “Playing
Back All Messages in a Folder Continuously”.
Notes
• If 99 messages have been recorded in a folder, you cannot
divide a message. In that case, reduce the number of
messages to 98 or less by erasing unnecessary messages or
by moving some of the messages to another folder before
dividing a message.
• If you divide a message with an alarm setting, the alarm
setting remains only with the former message divided.
• You cannot divide a message in the first or the last 1 second.
• If you divide a message frequently, the unit may become
unable to divide a message.
• Once a message is divided, you cannot combine the divided
messages with the IC recorder. To combine the divided
messages, use the supplied applicatio software.
Moving Messages to a Different
Folder — Move Function
You can move the recorded messages to another folder.
Example: Moving Message 3 in Folder A to Folder C
1
While the unit is stopped, select
the message you want to move.
2
Press DISPLAY/MENU for more
than 1 second until “MODE”
appears in the display window.
3
Press –
.
or
>
+ to select
“MOVE” and press
Nx
PLAY/
STOP.
The destination folder indication
flashes.
4
Press –
.
or
>
+ to select the
folder to which you want to
move the message (C in this
case).
5
Press
Nx
PLAY/STOP.
The message is moved in the
destination folder.
6
Press
x
STOP to exit the menu
mode.
To cancel moving the message(s)
Press
x
STOP before step 5.
Note
The move function does not duplicate a message in another
folder. When you move a message to another folder, the one in
the previous folder will be deleted.
To listen to the same message again
Press
Nx
PLAY/STOP. The same message will be played
back from the beginning.
To cancel the alarm setting before the
playback starts
Press
x
STOP while the alarm sound is heard. You can
stop even when the HOLD function is activated.
Notes
• You cannot set the alarm if you have not set the clock or
there is no message in the selected folder (the unit will not
enter the alarm setting mode when you press DISPLAY/
MENU in Step 2).
• If you try to set the alarm to play back a message at a
previously set time on another message, “PRE SET” will be
displayed, preventing new settings.
• If the alarm time comes while another message is being
played back with an alarm, the playback stops and the new
message will be played back.
• If the alarm time comes during recording, alarm will sound
for 10 seconds after the recording is finished and playback
begins. “
,
” will flash when the alarm time comes.
• If more than one alarm time comes during recording, only
the first message will be played back.
• When the alarm time comes when the unit is in the menu
mode, alarm will sound and the menu mode will be
canceled.
• If you erase the message you set the alarm to play back, the
alarm setting will be canceled.
• If you divide a message with the playback alarm, playback
will stop at the point you divided a message.
• You can adjust the playback volume with the VOL control.
• If the alarm time comes during erasing, alarm will sound for
10 seconds after the erasing is finished and playback begins.
• Alarm setting will not be canceled when the alarm playback
finishes. To cancel alarm setting, see below.
To cancel or change the alarm setting
1
Select the message you set the alarm to play back, and
press DISPLAY/MENU for more than 1 second to enter
the menu mode.
2
Press –
.
or
>
+ to select “ALARM ON”.
3
Press
Nx
PLAY/STOP to flash “ON”.
4
To cancel the alarm setting:
Press –
.
or
>
+ to
flash “OFF” and press
Nx
PLAY/STOP.
To change the alarm setting:
Press
Nx
PLAY/STOP.
When the alarm date is displayed, follow the Steps 3 to
6 of “Playing Back a Message at a Desired Time with an
Alarm” to change the alarm setting.
5
Press
x
STOP to exit the menu mode.
Preventing Accidental Operation
— HOLD function
Slide the HOLD switch to “ON”. “HOLD” will flash three
times, indicating that all the functions of the buttons are
locked.
When the HOLD function is activated during stop, all the
display will be turned off after “HOLD” flashes.
HOLD
To cancel the HOLD function
Slide the HOLD switch to “OFF” .
Note
When the HOLD function is activated during recording, cancel
the HOLD function first to stop recording.
1
Tip
Even if the HOLD function is activated, you can stop the alarm
playback. To stop the alarm or playback, press
x
STOP.
Selecting the Display Mode
You can select the display mode for the stop, recording
and playback modes.
Each time you press DISPLAY/MENU, the display mode
will change as shown below:
1
On the current time display
If the unit is left unoperated for more than 3
seconds in the stop mode, the display will
show the current time, regardless of the
display mode setting.
Counter:
B
Elapsed playback/recording
time in one message
m
Remaining time (REMAIN):
In the playback mode: The
remaining time of one message
indication. In the stop and
recording mode: The remaining
recording time indication.
m
Recorded date (REC DATE)*:
The date the current message
was recorded.
m
Recorded time (REC DATE)**:
The time the current message
was recorded.
* If the clock has not been set, “--Y--M--D” will be displayed.
**If the clock has not been set, “--:--” will be displayed.
Playing Back a Message at a
Desired Time with an Alarm
You can sound an alarm and start playback of a selected
message at a desired time. If you select “B-ONLY” in Step
6, an alarm sounds only and playback will not start.
1
Select the folder (See
“Selecting the Folder” on
the front side) and display
the message you want to
play back with an alarm.
2
Enter the alarm setting mode.
1
Press DISPLAY/MENU for
more than 1 second until
“MODE” appears in the
display window.
2
Press –
.
or
>
+ to select
“ALARM OFF”
(If the alarm has already set to
the selected message, “ALARM
ON” is displayed. If you do not
wish to change the setting, press
x
STOP and exit the menu
mode.)
Note
“ALARM OFF (or ON)” will not appear and the
alarm cannot be set if the clock has not been set or no
message has been recorded in the selected folder.
3
Press
Nx
PLAY/STOP.
“OFF” starts to flash.
4
Press –
.
or
>
+ to select
“ON”.
“ON” starts to flash.
5
Press
Nx
PLAY/STOP.
“DATE” will flash in the display
window.
3
Set the alarm date.
To play back on a desired date
(the message will be played back at the same time on
the same date every year until you erase the message)
1
Press
Nx
PLAY/STOP while
“DATE” is flashing.
The year digits will flash.
2
Press –
.
or
>
+ to
select the year digits and
press
Nx
PLAY/STOP.
The month digits will flash.
3
Press –
.
or
>
+ to select
the month digits and press
Nx
PLAY/STOP.
The day digits will flash.
4
Press –
.
or
>
+ to select
the day digits.
To play back once a week
Press –
.
or
>
+ to select the
day of the week.
To play back at the same time
every day
Press –
.
or
>
+ to select
“DAILY”.
4
Press
Nx
PLAY/STOP.
The hour digits will flash.
5
Set the alarm time.
1
Press –
.
or
>
+ to select
the hour digits and press
Nx
PLAY/STOP.
The minute digits will flash.
2
Press –
.
or
>
+ to select
the minute digits and press
Nx
PLAY/STOP.
“B-PLAY” will be displayed.
6
Set the alarm sound.
1
Press –
.
or
>
+ to select
the alarm sound either from
“B-PLAY”
(playing back the
message after the alarm) or
“B-ONLY” (alarm only)
2
Press
Nx
PLAY/STOP.
“ALARM ON” will be displayed.
7
Press
x
STOP to exit the menu
mode.
“
,
” is displayed when the number of the message with
alarm setting is selected.
At the set time, the alarm will sound for about 10 seconds
and the selected message will be played back. (If you have
selected “B-ONLY”, only the alarm will sound.)
During playback, “ALARM” will flash in the display
window.
When the playback ends, the unit will stop automatically
at the beginning of that message.
During
playback of
Message 3
After
adding a
recording
Message 4
Message 4
Added recording
Message 3
Message 3
The deleted part of
Message 3
Added overwrite recording in Message 3
The starting point of an overwrite recording
Message 4
Message 3
Message 3
Message 4
mini-plug (monaural)
External
microphone
(not supplied)
(micro-
phone)
Tape recorder, TV, radio, etc.
Audio connecting
cable with
attenuator
(not supplied)
mini-plug (monaural)
(micro-
phone)
EAR,
EARPHONE,
v
or REC OUT
mini-plug
(stereo or
monaural)
Using the ”Digital Voice Editor“
Software
By connecting the IC recorder to your computer with the
supplied USB cable, you can use the “Digital Voice
Editor” software to do the following:
• Saving the IC recorder messages on your computer’s
hard disk.
• Transferring the PC messages back to the IC recorder.
• Playing or editing the messages on your computer.
• Sending a voice e-mail message using MAPI e-mail
software.
For the details, see the supplied “Digital Voice Editor 2”
software operating instructions.
Connection
Precautions
On power
• Operate the unit only on 3 V DC. Use two LR03 (size
AAA) alkaline batteries.
On safety
• Do not operate the unit while driving, cycling or
operating any motorized vehicle.
On handling
• Do not leave the unit in a location near heat sources, or
in a place subject to direct sunlight, excessive dust or
mechanical shock.
• Should any solid object or liquid fall into the unit,
remove the batteries and have the unit checked by
qualified personnel before operating it any further.
On noise
• Noise may be heard when the unit is placed near an AC
power source, a fluorescent lamp or a mobile phone
during recording or playback.
• Noise may be recorded when an object, such as your
finger, etc., rubs or scratches the unit during recording.
On maintenance
• To clean the exterior, use a soft cloth slightly moistened
in water. Do not use alcohol, benzine or thinner.
If you have any questions or problems concerning your
unit, please consult your nearest Sony dealer.
Backup recommendations
To avoid potential risk of data loss caused by
accidental operation or malfunction of the IC recorder,
we recommend that you save a backup copy of your
recorded messages on a tape recorder, etc.
Specifications
IC recorder section
Recording media
Built-in flash memory 64 MB, Monaural
recording
Recording time
HQ: 7 hours 20 minutes
SP: 19 hours 35 minutes
LP: 32 hours 10 minutes
Freqency range
HQ:
260 Hz - 6,800 Hz
SP/LP:
220 Hz - 3,400 Hz
FM radio section
Frequency range
87.5 - 108 MHz
IF
225 kHz
Antennas
Headphone cord antenna
General
Speaker
approx. 2.8 cm (1
1
/
8
in.) dia.
Power output
250 mW
Input/Output
•Headphone jack (minijack) for 8 - 300 ohms
ear receiver/headphones
•Microphone jack (minijack, monaural)
Plug in power
Minimum input level 0.6 mV
3 kilohms or lower impedance microphone
•USB connector
Power requirements
Two LR03 (size AAA) alkaline batteries: 3 V DC
Dimensions (w/h/d) (not incl. projecting parts and
controls)
34.6
×
109.5
×
18.0 mm (1
3
/
8
×
4
3
/
8
×
23
/
32
in.)
Mass (incl. batteries)
68 g (2.4 oz)
Supplied accessories
Operating instructions (for the IC recorder (1)/
for the application software (1))
LR03 (size AAA) alkaline batteries (2) (for the
U.S.A.only)
Headphone (1)
Carrying pouch (1) (excluding the U.S.A. and
Europe)
USB connecting cable (1)
Application software (CD-ROM) (1)
Optional accessories
Electret Condenser Microphone ECM-DM5P,
ECM-CZ10, ECM-TL1 (for telephone recording)
Audio connecting cable RK-G64HG /RK-
G69HG (excluding Europe)
Active speaker SRS-T88, SRS-T80
Your dealer may not handle some of the above listed
optional accessories. Please ask the dealer for detailed
information.
Design and specifications are subject to change without
notice.
To USB
connector of
IC recorder
To USB
connector of
your computer
Connecting cable
(supplied)
Listening to an FM radio station
Presetting FM radio stations
The display in the display window may be different from the actual one in some regions.
You can preset up to 25 FM radio stations in the IC recorder‘s memory.
1
Press FM to enter FM radio mode.
2
Tune in the station you want to preset and store
on the preset number.
Presetting FM radio stations
automatically
The display in the display window may be different from the actual one in some regions.
You can preset up to 25 FM radio stations automatically in the preset menu.
1
Press FM to enter FM radio mode.
2
Preset stations automatically in the menu.
The display in the display window may be different from the actual one in some
regions.
1
Press FM to enter FM radio
mode.
2
Tune in a station.
Listening to a preset radio station
The display in the display window may be different from the actual one in some regions.
1
Press FM repeatedly until “[P]” appears.
1
Tip
If you press FM repeatedly, the radio switches between tuning manually (“P” appears) and tuning by
preset number (“[P]” appears).
2
Tune in the station.
Erasing preset FM radio stations
To cancel erasing
Press
x
STOP before you press
Nx
PLAY/STOP in step
3
.
Note
The headphone cord is an FM
antenna, therefore, connect the
headphone when listening to the
radio.
Switching the FM radio
output between speaker
and headphone
When a headphone is connected
during FM reception or FM
recording, you can switch between
the sound from the speaker and
from the headphone by pressing
FM for more than 1 second.
The sound will be switched
between speaker and headphone.
Recording FM broadcasts
1
Press FM to enter the FM mode.
2
Tune in the station you want to
record.
3
Press
zX
REC/PAUSE to start
recording.
4
Press
x
STOP to stop recording.
The display in the display window may be different from the actual one in some
regions.
1
Press FM repeatedly until
“[P]” appears.
2
Press –
.
or
>
+
repeatedly until the preset
number you want to erase is
displayed.
3
Erase the preset number.
Switching the receiver sensitivity of the FM
radio
1
Press FM to enter the FM mode.
2
Press DISPLAY/MENU for more than 1 second until
“AUTO-P” appears in the display window.
3
Press –
.
or
>
+ to select “SENS” and press
Nx
PLAY/STOP.
4
Press –
.
or
>
+ to select “LOCAL” or “DX” and
press
Nx
PLAY/STOP.
5
Press
x
STOP to exit the menu mode.
1
Press
Nx
PLAY/STOP for more than 1
second.
The preset number and “ERASE” flash
in the display window.
2
Press
Nx
PLAY/STOP.
The preset number will be changed to
“- -.”
Press –
.
or
>
+ repeatedly to tune in
a station or press and hold –
.
or
>
+
until the frequency digits begin to change
on the display.
The IC recorder automatically scans the radio
frequencies and stops when it finds a clear
station.
If you cannot tune in a station, press
–
.
or
>
+ repeatedly to change the
frequency step by step.
When a station you tune in is a preset station,
the preset number is displayed, otherwise,
“- -” appears instead.
Press and hold
Nx
PLAY/STOP until a preset
number flashes on the display.
The station will be stored in memory after 3
seconds.
3
Press –
.
or
>
+ to select “YES”
and press
Nx
PLAY/STOP.
The IC recorder automatically scans
the radio frequencies and the
stations will be stored in memory
from the lower frequencies to the
higher ones.
4
Press
x
STOP to exit from the
menu mode.
If the unit is left unused for more
than 3 seconds in the stop mode, the
display will show the current time.
1
Press DISPLAY/MENU for
more than 1 second until
“AUTO- P” appears in the
display window.
2
Press
Nx
PLAY/STOP.
1
Press –
.
or
>
+ repeatedly until the
preset number you want is displayed.
When you press and hold –
.
or
>
+ , the
preset numbers change rapidly.
2
Press
x
STOP to turn the FM radio off.
