Sony ICD-MS525 Operating Instructions Manual Download Page 23

Page: 23 / 76

Basic Operations

Using the Display Window

Parts in the display window

V•O•R (voice operated
recording) indicator (16, 58)

“Memory Stick” indicator

Bookmark indicator (29)
Appears when the bookmark
is set for a message.

Folder indication (Menu
indication /Messages, etc.)
(13, 18)

Priority marks (42)

Selected message number
(18)/Mode indication of the
menu (ON, OFF, etc.) (57)

Remaining memory
indicator (17)

Remaining battery indicator
(7)

Alarm indicator (52)
Appears when the alarm is
set for a message.

Recording mode indication (59)
Displays the current
recording mode:
• SP: Standard Play mode
• LP: Long Play mode

MIC SENSE (microphone
sensitivity) indication (58)
Displays the current
microphone sensitivity:
•H (high): To record at a

meeting or in a quiet/
spacious place.

•L (low): To record for

dictation or in a noisy
place.

Counter /Remaining time
indication /Recording date
and time indication /
Current time indication (25)
The display selected with the
DISPLAY in the menu
appears.

Note

The effect of the back light of the
display window may be reduced
in a bright location.

Continued

Summary of Contents for ICD-MS525













































































Search results

Summary of Contents for ICD-MS525

Reviews:

Related manuals for ICD-MS525

Brands by name

Popular brands

Sony ICD-MS525, Operating Instructions Manual

Search results

Summary of Contents for ICD-MS525

Reviews:

Related manuals for ICD-MS525

Brands by name

Popular brands