Sony ICD-AX412 Operating Instructions Manual Download Page 79

Page: 79 / 131

the

nu
Fu

nct

Detail
Menu

Beep

Sets whether a beep will be heard or not.
ON*:

A beep will sound to indicate that an operation has been
accepted or an error has occurred.

OFF:

No beep sound will be heard.

Note

The alarm sounds even if you set “Beep” to “OFF” in the
menu.

–

USB Charge

Sets whether rechargeable batteries will be charged using a
USB connection or not.
ON*:

The rechargeable batteries will be charged.

OFF:

The rechargeable batteries will not be charged.

Note

If you use a USB AC adaptor (not supplied) to connect the
IC recorder to the AC outlet (page 99), you can charge
rechargeable batteries (not supplied) regardless this setting.

–

Menu items

Settings (*: Initial setting)

See page

Summary of Contents for ICD-AX412




































































































































Search results

Summary of Contents for ICD-AX412

Reviews:

Related manuals for ICD-AX412

Brands by name

Popular brands

Sony ICD-AX412, Operating Instructions Manual

Search results

Summary of Contents for ICD-AX412

Reviews:

Related manuals for ICD-AX412

Brands by name

Popular brands