Sony IC RECORDER ICD-SX750 User Manual Download

Page: 71 / 136

ICD-SX750 4-157-612-13(1)

itin

g M

Editing Messages

Erasing Messages

You can erase the recorded messages

one by one or all messages in a folder at

a time.

Note

Once a recording has been erased, you cannot

retrieve it.

Erasing messages one by one



ERASE



You can erase unwanted messages,

retaining all other messages when the IC

recorder is in the stop or playback mode.

When a message is erased, the

remaining messages will advance and

be renumbered so that there will be no

space between messages.

Press ERASE while playing back

the message you want to erase or

press and hold ERASE while the IC

recorder is in the stop mode.

The message title, message number,

and “ERASE? [ERASE] TO EXECUTE” will

be displayed and the message will be

played back.

Press ERASE again while “ERASE?

[ERASE] TO EXECUTE” is displayed.

“ERASING…” will be displayed,

one message will be erased, and

the remaining messages will be

renumbered.

To cancel erasing

Press



(stop) in step 1.

Summary of Contents for IC RECORDER ICD-SX750









































































































































Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands

Sony IC RECORDER ICD-SX750, User Manual

Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands