ICD-SX750 4-157-612-13(1)
GB
Re
co
rd
in
g
To
Do this
pause
recording*
Press
(record/pause).
During recording pause, the
operation indicator flashes
in red and “
“ flashes in
the display window.
release pause
and resume
recording
Press
(record/pause)
again.
Recording resumes
from that point. (To stop
recording after pausing
recording, press
(stop).)
review the
current
recording
instantly**
Press
.
Recording stops and
playback starts from the
beginning of the message
just recorded.
review during
recording**
Press and hold
during
recording or recording
pause. Recording stops and
you can search backwards
while listening to fast
playback sound. After you
release
, playback starts
from that point.
* One hour after you pause recording,
recording pause is automatically released
and the IC recorder enters the stop mode.
** You cannot select this function in the
manual recording mode.
Monitoring the recording
Connect the supplied stereo
headphones to the
(headphone)
jack and monitor the recording. You
can adjust the monitoring volume by
pressing VOL + or –, but the recording
level is fixed.
Recording a sound centering on a
specific direction
To record a sound centering on a specific
direction, slide the DIRECTNL switch
to the “ON” position. This is convenient
when you want to record a particular
sound at a conference/meeting, etc.
When the DIRECTNL switch is set to
“ON,” the directional microphone is used,
therefore the sound is recorded in the
monaural mode even when you select
the stereo recording mode (LPCM 44/16,
LPCM 22/16, MP3 192k, MP3 128k, LPEC
STHQ, LPEC ST or LPEC STLP mode).
When you are using an external
microphone, the DIRECTNL switch does
not function.
