Sony HXR-NX5U Operating Manual Download Page 87

Page: 87 / 128

Usi
n

th
e

OFF

Does not superimpose the date and time on
images.

Superimposes the date and time on images.

Tips

• When zebra or peaking is activated, the date and

time characters are affected by the signal, but
properly recorded on images.

OFF

Cancels the melody.

Activates a melody when you start/stop
recording, or when you are warned with
warning indicators, etc.

When you set this function to [OFF], you
can turn off the front camera recording
lamp. The default setting is [ON].

Tips

• You can assign this function to an ASSIGN

button (p. 47).

When you set this function to [OFF], you
can turn off the rear camera recording lamp.
The default setting is [ON].

Tips

• You can assign this function to an ASSIGN

button (p. 47).

When you set this function to [ON], you
can use the supplied Wireless Remote
Commander (p. 122). The default setting is
[ON].

Tips

• Set to [OFF] to prevent your camcorder from

responding to a command sent by another
remote control unit.

Displays the total hours of operation in 10-
hour increments.

See page 110.

DATE REC

BEEP

REC LAMP[F] (Recording lamp
[front])

REC LAMP[R] (Recording lamp
[rear])

REMOTE CONTROL

OPERATION TIME

CALIBRATION

Summary of Contents for HXR-NX5U

































































































































Search results

Summary of Contents for HXR-NX5U

Reviews:

Sony HXR-NX5U, Operating Manual, Page: 87 / 128

Search results

Summary of Contents for HXR-NX5U

Reviews: